Abstract:This paper presents a polyimide-based film bulk acoustic resonator (PI-FBAR) humidity sensor operating in resonant frequency and reflection coefficient S-11 dual-mode. Models and experiments showed that those two modes are governed by different mechanisms, of which the former is based on the modulation of the humidity on the Young's modulus of PI, while the latter is based on the modulation of the humidity on dynamic resistance. In the full-scale relative humidity (RH) testing range (20%-80%), the resonant mode achieved a sensitivity of 29.93 kHz/%RH (28.56 ppm/%RH) with ultra-high linearity (R-2 = 0.9993), and the humidity hysteresis error is only about 1.32% RH. For the S-11 response, an ultra-high average humidity sensitivity of 0.044dB/%RH (2095ppm/%RH) was achieved, and the sensitivity at 20% low relative humidity reached 0.075dB/%RH (3571ppm/%RH), which is more than 2 orders of magnitude higher than that of the resonant frequency response. And the limit of detection (LOD) for the humidity response of S-11 is 0.035% RH, which is half lower than that of the resonant mode. Thus, we can choose a more appropriate sensing mode according to particular application or combine these two mechanisms in one test to expand the sensor competences by taking advantages of each method. In addition, as both of the two modes have high sensitivity to humidity and temperature, we deduced a method to calibrate the temperature for the humidity sensing. Based on this dual-mode mechanism, we can further achieve either temperature-calibrated humidity sensing or dual-variable sensing of humidity and temperature with more accurate sensing results.

Two Birds with One Stone: Impedance-Voltage Dual-Mode Low Humidity Sensor Based on LiBr-MOF-801 with High Response

Multifunctional Conductive Copper Tape-Based Triboelectric Nanogenerator and As a Self-Powered Humidity Sensor

A Novel Serial High Frequency Surface Acoustic Wave Humidity Sensor

Multi-channel impedance measurement system for polymer humidity sensors

Facile Primary Battery-Based Humidity Sensor for Multifunctional Application

A novel surface acoustic wave-impedance humidity sensor based on the composite of polyaniline and poly(vinyl alcohol) with a capability of detecting low humidity

Self-Powered, Rapid-Response, and Highly Flexible Humidity Sensors Based on Moisture-Dependent Voltage Generation.

Self-Powered, Highly Sensitive, and Flexible Humidity Sensor Based on Carboxymethyl Cellulose for Multifunctional Applications

Sensitive Humidity Sensors Based on Ionically Conductive Metal-Organic Frameworks for Breath Monitoring and Non-Contact Sensing

Sensitive humidity sensor based on moisture-driven energy generation

Novel High-Performance Self-Powered Humidity Detection Enabled by Triboelectric Effect

Flexible, non-contact and multifunctional humidity sensors based on two-dimensional phytic acid doped co-metal organic frameworks nanosheets

Meshed, Flexible, and Self-Supported Humidity Sensors by Direct-Writing with Multifunctional Applications

PI-Based Dual-Mode FBAR Humidity Sensor Toward Ultra-High Sensitivity and Self-Temperature-Compensation Capability

Humidity Sensor Based on Thin-Film Piezoelectric-on-Substrate Resonator and MoS2 for Multifunctional Applications.

High-performance electrochemical power generation humidity sensor based on NaCl/sodium alginate humidity sensing electrolyte and Cu/Zn electrodes for visual humidity indication and respiratory patterns detection

Self-powered Humidity Sensor Based on Triboelectric Nanogenerator.

Ferroelectric Polarization and Oxygen Vacancy Synergistically Induced an Ultrasensitive and Fast Humidity Sensor for Multifunctional Applications

Electrochemical humidity sensor enabled self-powered wireless humidity detection system

A Humidity Sensor Based on a Whispering-Gallery-Mode Resonator with an L-shaped Open Microcavity

A High-Performance Humidity Sensor Based on In-Pcb Interdigitated Electrodes