Dual Resistance and Impedance Investigation: Ultrasensitive and Stable Humidity Detection of Molybdenum Disulfide Nanosheet-Polyethylene Oxide Hybrids

Yanjie Wang,Yong Zhou,Guangzhong Xie,Jing Li,Yuhang Wang,Xiaoyu Liu,Zhigang Zang
DOI: https://doi.org/10.1021/acsami.1c02119
2021-05-20
Abstract:There is an imperative demand for real-time relative humidity (RH) discrimination with excellent sensitivity and robust operation stability over a broad RH range at room temperature (22 °C). Of diverse two-dimensional (2D) materials, <i>p</i>-type molybdenum disulfide (MoS<sub>2</sub>) as a typical gas-sensing candidate has been rarely harnessed for humidity detection due to tiny response and undesirable stability induced by the conversion from electron to proton conduction with increasing RH. To overcome these issues, MoS<sub>2</sub>-polyethylene oxide (PEO) inorganic–organic nanocomposites as the sensing layer were facilely prepared in this work. The results showed that the composition-optimized composite film sensor surpassed the isolated MoS<sub>2</sub> counterpart in terms of repeatability, response, hysteresis, stability, and selectivity. Both DC-resistance and AC-impedance analyses unveiled different roles of MoS<sub>2</sub> and PEO components within composites. MoS<sub>2</sub> strengthened the film structure, while hydrophilic PEO enlarged the water-adsorption capacity and thus improved the response and detection reliability via water-triggered ionic conductivity. This work afforded a feasible strategy via inorganic–organic combination to distinguish trace RH and improved the operation stability of 2D material-based sensors, simultaneously demonstrating realistic monitoring applications of exhaled gas detection and distance variation of moisture-emitting objects.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02119?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02119</a>.The technological features of gas sensors, gas-sensing setup, SEM images, the adsorption/desorption isotherm and XRD peak shift of the sensitive layers, response hysteresis, sensor stability, selectivity, impedance–RH relationship as a function of frequency, bode plots of the MoS<sub>2</sub>-PEO sensor, and CIS and bode plots of the MoS<sub>2</sub> sensor at different RH values (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02119/suppl_file/am1c02119_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to achieve real - time high - sensitivity and high - operational - stability detection of relative humidity (RH) at room temperature. Specifically, the research targets the application problem of using molybdenum disulfide (MoS₂) as a typical gas - sensitive material in humidity detection. Although MoS₂ has good performance in the field of gas sensing, it has problems of small response and poor stability in humidity detection, especially under low relative humidity conditions. These problems are mainly caused by the transition from electron conduction to proton conduction as the relative humidity increases. To overcome these challenges, the author proposes a new strategy, that is, combining MoS₂ with polyethylene oxide (PEO) to form an inorganic - organic nanocomposite, thereby improving the performance of the humidity sensor. In this way, the author hopes to enhance the repeatability, responsiveness, hysteresis, stability and selectivity of the sensor. In addition, the paper also explores how to reveal the different roles of MoS₂ and PEO components in the composite through resistance and impedance analysis, as well as the potential of this composite in practical applications, such as non - contact sweat secretion monitoring and exhaled gas detection.