Abstract:Two polyelectrolytes, i.e., cationic poly(diallydimethylammonium chloride) (PDDA) and anionic sodium poly(4-styrenesulfonate) (PSSNa), were separately mixed with graphene oxide (GO) and hydrazine in solution, and heat-treated to result in composites of PDDA/graphene (GN) and PSSNa/GN, respectively. The composites were characterized by scanning electron microscopy, transmittance electron microscopy and Raman spectroscopy. Impedance-type humidity sensors were constructed by depositing the composite films onto interdigitated gold electrodes via dip-coating. The electrical response of the composite humidity sensors toward relative humidity (RH) was investigated at room temperature. It was found that the composites with higher content of GN exhibited lower impedance at low humidity levels. Both composite sensors could detect very low humidity (down to 0.2%RH), and showed good response magnitude in the low humidity range (relative impedance change of 300% and 1000% from 0.2 to 30%RH for PSSNa/GN and PDDA/GN, respectively). Moreover, the composites exhibited slight hysteresis similar to that of the polyelectrolytes alone, while their response time for desorption was even reduced. The sensing mechanism of the composites was explored by complex impedance spectra analysis, and the good sensing behavior at low humidity was proposed to the special electrical property and unique two-dimensional nanosheet structure of GN.

Bilayer-structured Nanocomposite of Ag and Crosslinked Polyelectrolyte for the Detection of Humidity

Humidity Sensing Properties of the Composite of Electrospun Crosslinked Polyelectrolyte Nanofibers Decorated with Ag Nanoparticles

Bilayer Composite Humidity Sensor Based on Polyaniline and Polyelectrolyte

Crosslinked and quaternized poly(4-vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity.

A composite of quaternized and crosslinked poly(4-vinylpyridine) with processable polypyrrole for the construction of humidity sensors with improved sensing properties

Preparation of Nanocomposite of Graphene and Quaternized Poly(4-vinylpyridine)and investigations on its humidity sensory properties

A Novel Humidity Sensor Based on Carbon Black/poly(4-vinylpyridine) Nanocomposite

Bilayer-structured composite sensor based on polyaniline and polyelectrolyte for sensitive detection of low humidity

Facilely prepared composites of polyelectrolytes and graphene as the sensing materials for the detection of very low humidity

Poly(4-vinylpyridine)/carbon Black Composite As a Humidity Sensor

Humidity sensors based on the composite of multi-walled carbon nanotubes and crosslinked polyelectrolyte with good sensitivity and capability of detecting low humidity

A humidity sensor based on interpenetrating polymer network prepared from poly(dimethylaminoethyl methacrylate) and poly(glycidyl methacrylate)

Humidity Sensors Using in Situ Synthesized Sodium Polystyrenesulfonate/zno Nanocomposites.

A novel surface acoustic wave-impedance humidity sensor based on the composite of polyaniline and poly(vinyl alcohol) with a capability of detecting low humidity

Electrospun nanofibers of polymer composite as a promising humidity sensitive material

A RESISTIVE-TYPE NANOSTRUCTURED HUMIDITY SENSOR PREPARED BY ELECTROSPINNING

Bilayer thin film humidity sensors based on sodium polystyrenesulfonate and substituted polyacetylenes

A resistive-type humidity sensor based on crosslinked polyelectrolyte prepared by UV irradiation

A Novel Resistive Humidity Sensor Based On Sodium Polystyrenesulfonate/Tio2 Nanocomposites

The Electrical Responses to Humidity of a Composite of Polyaniline and Polyelectrolyte

Highly Sensitive and Ultrafast Response Surface Acoustic Wave Humidity Sensor Based on Electrospun Polyaniline/poly(vinyl Butyral) Nanofibers.