Abstract:Nanostructured humidity sensors have been facilely prepared by solvent annealing of polystyrene-b-poly(4-vinylpyridine) deposited on interdigitated gold electrodes and subsequent sulphonation. The structure, composition, morphology and hydrophilicity of the block copolymer (BCP) have been characterized by gel-permeation chromatography, H-1 NMR, FT-IR, elemental analysis, scanning electron microscopy and static water contact angle measurements. Phase separation of the BCP film induced by annealing in CHCl3 vapor and hot ethanol resulted in its fishnet-like porous nanostructure. Humidity sensing properties of the nanostructured BCP based sensor have been examined at room temperature, and the sensing mechanism was examined. Both concentration of polymer solution for film preparation, and the sulphonation duration seriously affected the sensing properties of the BCP based sensor. Under optimal conditions, the BCP based sensor demonstrated high response magnitude towards relative humidity (RH) (impedance change of three orders of magnitude in the range of 40-90% RH). Moreover, it was featured with quick response (t(90%) of 10 s and 13 s for humidification and desiccation, respectively), good sensing repeatability and relatively small hysteresis (similar to 5% RH), which is attributed to its special nanostructure. The desirable sensing performance suggests the potentials of the BCP with phase separation-induced nanostructures as high performance humidity sensing material. (C) 2017 Elsevier B.V. All rights reserved.

A humidity sensor based on interpenetrating polymer network prepared from poly(dimethylaminoethyl methacrylate) and poly(glycidyl methacrylate)

A fast response resistive thin film humidity sensor based on poly(4-vinylpyridine) and poly(glycidyl methacrylate)

Humidity sensitive properties of crosslinked and quaternized poly(4-vinylpyridine-co-butyl methacrylate)

A resistive-type humidity sensor based on crosslinked polyelectrolyte prepared by UV irradiation

A composite of quaternized and crosslinked poly(4-vinylpyridine) with processable polypyrrole for the construction of humidity sensors with improved sensing properties

Humidity sensitive properties of substituted polyacetylenes

Bilayer thin film humidity sensors based on sodium polystyrenesulfonate and substituted polyacetylenes

Humidity Sensitive Properties of Copolymer of Quaternary Ammonium Salt with Polyether–salt Complex

Bilayer Composite Humidity Sensor Based on Polyaniline and Polyelectrolyte

Crosslinked and quaternized poly(4-vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity.

Sulphonated Polystyrene-B-poly(4-vinylpyridine) with Nanostructures Induced by Phase Separation As Promising Humidity Sensitive Material

Humidity Sensing Properties of the Composite of Electrospun Crosslinked Polyelectrolyte Nanofibers Decorated with Ag Nanoparticles

Poly(4-vinylpyridine)/carbon Black Composite As a Humidity Sensor

Electrospun nanofibers of polymer composite as a promising humidity sensitive material

A highly water-resistive humidity sensor based on silicon-containing polyelectrolytes prepared by one-pot method

Humidity sensor based on a cross-linked porous polymer with unexpectedly good properties

A Novel Humidity Sensor Based on Carbon Black/poly(4-vinylpyridine) Nanocomposite

A polymer sensitive to humidity and its electrical properties analysis

Bilayer-structured Nanocomposite of Ag and Crosslinked Polyelectrolyte for the Detection of Humidity

The Electrical Responses to Humidity of a Composite of Polyaniline and Polyelectrolyte

Improving humidity sensing properties of copolymer-based polyelectrolytes by modifying the chemical structure and content of the comonomers