Abstract:Crosslinked and quaternized poly(4-vinylpyridine) (QC-P4VP) nanofibers have been fabricated via electro-spinning followed by reaction with 1-4-dibromobutane. Subsequent decoration of the nanofibers with Ag nanoparticles by in-situ reduction obtained a nanostructured composite humidity sensing material. The nanofibers and the composites were characterized by FT-IR and scanning electron microscopy. It was found that the morphology and humidity sensing properties of the nanofibers could be greatly modified by adding poly(vinyl butyral) into the electrospinning solution. Moreover, the decoration with Ag nanoparticles effectively reduced the impedance of the composite under dry atmosphere, and facilitated the measurement of low humidity. Under optimized conditions, the composite presented high response magnitude to humidity, fast response (t(90%) of 16 s an 26 s for response and recovery, respectively), small hysteresis (similar to 2.8%RH), good sensing repeatability and the capability of detecting very low humidity (similar to 3.6%RH), representing much improvement over QC-P4VP nano fibers alone. The complex impedance spectra of the composites under different humidity levels were measured, and the sensing mechanism was explored. It is proposed that the highly desirable humidity sensing properties of the composite result from its balanced hydrophilicity and the distinct nanostructure.

A resistive-type humidity sensor based on crosslinked polyelectrolyte prepared by UV irradiation

Humidity sensitive properties of crosslinked and quaternized poly(4-vinylpyridine-co-butyl methacrylate)

A highly water-resistive humidity sensor based on silicon-containing polyelectrolytes prepared by one-pot method

A humidity sensor based on interpenetrating polymer network prepared from poly(dimethylaminoethyl methacrylate) and poly(glycidyl methacrylate)

A fast response resistive thin film humidity sensor based on poly(4-vinylpyridine) and poly(glycidyl methacrylate)

Crosslinked and quaternized poly(4-vinylpyridine)/polypyrrole composite as a potential candidate for the detection of low humidity.

A fast response resistance-type humidity sensor based on organic silicon containing cross-linked copolymer

A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

A composite of quaternized and crosslinked poly(4-vinylpyridine) with processable polypyrrole for the construction of humidity sensors with improved sensing properties

Humidity Sensitive Properties of Copolymer of Quaternary Ammonium Salt with Polyether–salt Complex

Poly(4-vinylpyridine)/carbon Black Composite As a Humidity Sensor

A surface acoustic wave humidity sensor based on electrosprayed silicon-containing polyelectrolyte

Aging Mechanism of Polymer Resistive-type Humidity Sensitive Material

The Effect of Humidity on the Electrical Behavior of A Cationic Conjugated Polyelectrolyte Based on Poly(Phenylene Vinylene)

Humidity Sensing Properties of the Composite of Electrospun Crosslinked Polyelectrolyte Nanofibers Decorated with Ag Nanoparticles

Humidity sensitive properties of a novel soluble conjugated copolymer: ethynylbenzene-co-propargyl alcohol

A novel surface acoustic wave-impedance humidity sensor based on the composite of polyaniline and poly(vinyl alcohol) with a capability of detecting low humidity

Humidity sensitive properties of substituted polyacetylenes

Improving humidity sensing properties of copolymer-based polyelectrolytes by modifying the chemical structure and content of the comonomers

Bilayer Composite Humidity Sensor Based on Polyaniline and Polyelectrolyte

Bilayer-structured Nanocomposite of Ag and Crosslinked Polyelectrolyte for the Detection of Humidity