Abstract:In the present paper the humidity sensing properties of regioregular rr-P3HT (poly-3-hexylthiophene) polymer films is investigated by means of surface acoustic wave (SAW) based sensors implemented on LiNbO3 (1280 Y-X) and ST-quartz piezoelectric substrates. The polymeric layers were deposited along the SAW propagation path by spray coating method and the layers thickness was measured by atomic force microscopy (AFM) technique. The response of the SAW devices to relative humidity (rh) changes in the range ~5–60% has been investigated by measuring the SAW phase and frequency changes induced by the (rh) absorption in the rr-P3HT layer. The SAW sensor implemented onto LiNbO3 showed improved performance as the thickness of the membrane increases (from 40 to 240 nm): for 240 nm thick polymeric membrane a phase shift of about −1.2 deg and −8.2 deg was measured for the fundamental (~78 MHz operating frequency) and 3rd (~234 MHz) harmonic wave at (rh) = 60%. A thick rr-P3HT film (~600 nm) was deposited onto the quartz-based SAW sensor: the sensor showed a linear frequency shift of ~−20.5 Hz per unit (rh) changes in the ~5–~50% rh range, and a quite fast response (~5 s) even at low humidity level (~5% rh). The LiNbO3 and quartz-based sensors response was assessed by using a dual delay line system to reduce unwanted common mode signals. The simple and cheap spray coating technology for the rr-P3HT polymer films deposition, complemented with fast low level humidity detection of the tested SAW sensors (much faster than the commercially available Michell SF-52 device), highlight their potential in a low-medium range humidity sensing application.

A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

A Novel Serial High Frequency Surface Acoustic Wave Humidity Sensor

A surface acoustic wave humidity sensor based on electrosprayed silicon-containing polyelectrolyte

A novel surface acoustic wave-impedance humidity sensor based on the composite of polyaniline and poly(vinyl alcohol) with a capability of detecting low humidity

Sodium Alginate/MXene-Based Flexible Humidity Sensors with High-Humidity Durability and Application Potentials in Breath Monitoring and Non-Contact Human–Machine Interfaces

A highly water-resistive humidity sensor based on silicon-containing polyelectrolytes prepared by one-pot method

A fast response resistance-type humidity sensor based on organic silicon containing cross-linked copolymer

A fast response resistive thin film humidity sensor based on poly(4-vinylpyridine) and poly(glycidyl methacrylate)

Highly Sensitive and Ultrafast Response Surface Acoustic Wave Humidity Sensor Based on Electrospun Polyaniline/poly(vinyl Butyral) Nanofibers.

Surface Acoustic Wave Humidity Sensors Based on Poly(p-Diethynylbenzene) and Sodium Polysulfonesulfonate

An Excellent Humidity Sensor Made of Surface Acoustic Wave Resonator Coated with MWCNTs/Nafion Composite Material Films

SAW Humidity Sensing with rr-P3HT Polymer Films

A flexible, sensitive and stable humidity sensor based on an all-polymer nanofiber film

A RESISTIVE-TYPE NANOSTRUCTURED HUMIDITY SENSOR PREPARED BY ELECTROSPINNING

A resistive-type humidity sensor based on crosslinked polyelectrolyte prepared by UV irradiation

Polyimide-Sputtered and Polymerized Films with Ultrahigh Moisture Sensitivity for Respiratory Monitoring and Contactless Sensing

Ultrasensitive and flexible humidity sensors fabricated by ion beam sputtering and deposition from polydimethylsiloxane

A Novel Resistive Humidity Sensor Based On Sodium Polystyrenesulfonate/Tio2 Nanocomposites

Light Humidity Sensor of Surface Plasmon Resonance by Symmetric Metal Film

A highly sensitive humidity sensor based on a nanofibrous membrane coated quartz crystal microbalance

Wireless and Passive SAW-Based Humidity Sensor Employing SiO2 Thin Film