Abstract:This work includes a precise study of the mechanism of how in situ atomic layer deposition (ALD)‐stacked Al2O3 and SnO channel thin‐film transistors exhibit exceptionally low S‐value (0.15 V decade−1) and enhanced stability, which are related to the change occurring in the film. Also, using this improved p‐channel, an all‐ALD channel complementary metal–oxide–semiconductor, which has not been reported before, is fabricated. Tin monoxide (SnO) has been studied widely over the past several decades due to its promising theoretical p‐type performance. However, limited fabrication processes due to the low thermal and air stability of SnO have resulted in poor performance in thin‐film transistors (TFTs). Here, it is suggested that in situ atomic layer deposition (ALD) of an Al2O3 capping layer can improve the electrical performance in SnO TFTs. By adopting an in situ stacking process, which protects vulnerable SnO thin films from exposure to air and contamination, SnO exhibits enhanced crystallinity, electrical performance, and improved scaling limitation of channel thickness. Especially, in situ stacked Al2O3 on a 7 nm SnO TFT has an exceptionally low subthreshold swing (0.15 V decade−1), high on/off ratio (6.54 × 105), and reasonable mobility (1.14 cm2 V−1 s−1) while the bare SnO TFT is not activated. Computational thermodynamics such as chemical potential analysis, nucleation Gibbs free‐energy calculations, and various analytical techniques are used to reveal the origin of highly crystallized SnO formations via in situ deposition of Al2O3. Finally, state‐of‐the‐art all‐ALD‐channel complementary metal–oxide–semiconductor inverters using n‐type indium gallium zinc oxide and p‐type SnO TFTs are integrated, which exhibit a maximum voltage gain of 240 V V−1 and a noise margin of 89.3%.

Study Of Dc Sputtered Sno Growth And Its Applications In Thin Film Transistors

Magnetron-Sputtered SnO Thin Films for p-Type and Ambipolar TFT Applications

Eco-Friendly, Water-Induced In2O3 Thin Films for High-Performance Thin-Film Transistors and Inverters

Study on the Transition between p and n Types of SnOx Film Deposited by DC Sputtering

Study of zinc tin oxide thin-film transistor

Effects of Growth Temperature and Annealing on Properties of Zn3sn2o7 Thin Films and Application in Tfts

Highly Dense and Stable p-Type Thin-Film Transistor Based on Atomic Layer Deposition SnO Fabricated by Two-Step Crystallization

Controlled 2D growth approach via atomic layer deposition for improved stability and performance in flexible SnO thin-film transistors

Tunable Electrical Properties of NiO Thin Films and P-Type Thin-Film Transistors

Preparation and characterization of SnO films via reactive sputtering for ambipolar thin-film transistor applications

Compositional changes between metastable SnO and stable SnO 2 in a sputtered film for p-type thin-film transistors

The Significance of an In Situ ALD Al2O3 Stacked Structure for p‐Type SnO TFT Performance and Monolithic All‐ALD‐Channel CMOS Inverter Applications

Annealing effects of In2O3 thin films on electrical properties and application in thin film transistors

High mobility and hysteresis free InGaSnO thin film transistors by co-sputtering via low temperature post annealing process

Influence of Post-Deposition Annealing on the Novel Alloyed SnSxO1-x Semiconductor in P-Type Thin-Film Transistors

Performance Improvement of a-In-Ga-Sn-O Thin-Film Transistor with Oxygen Doping by Reactive Sputtering Method

Fabrication and Characterization of Thin-Film Transistors with Sno2 Channel by Spray Pyrolysis

The Investigation of Indium-Free Amorphous Zn-Al-Sn-O Thin Film Transistor Prepared by Magnetron Sputtering

ZnSnO thin-film transistors by reactive co-sputtering of Zn and Sn metal targets

High-Performance Amorphous Zinc–Tin–Oxide Thin-Film Transistors with Low Tin Concentration

Amorphous P-Type CuNiSnO Thin-Film Transistors Processed at Low Temperatures