Abstract:Over the past several decades, tin monoxide (SnO) has been studied extensively as a p-type thin film transistor (TFT). However, its TFT performance is still insufficient for practical use. Many studies suggested that the instability of the valence state of Sn (Sn2+/Sn4+) is a critical reason for the poor performance such as limited mobility and low on/off ratio. For SnO, the Sn 5s-O 2p hybridized state is a key component for obtaining p-type conduction. Thus, a strategy for stabilizing the SnO phase is essential. In this study, we employ a variety of analytical methods such as X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and Hall measurement to identify the main contributors to the physical properties of SnO. It is revealed that precision control of the process temperature is needed to achieve both the crystallinity and thermal stability of SnO. In other words, it would be ideal to obtain high-quality SnO thin films at low temperature. We find that atomic layer deposition (ALD) is a quite advantageous process for obtaining high-quality SnO thin films by the following two-step process: (i) growth of highly c-axis oriented SnO at the initial stage and (ii) further crystallization along the in-plane direction by a postannealing process. Consequently, we obtained a highly dense SnO thin film (film density: 6.4 g/cm3) with a high Hall mobility of ∼5 cm2/(V·s). The fabricated SnO TFTs exhibit a field-effect mobility of ∼6.0 cm2/(V·s), which is a quite high value among the SnO TFTs reported to date, with long-term stability. We believe that this study demonstrates the validity of the ALD process for SnO TFTs.

Study on the Transition between p and n Types of SnOx Film Deposited by DC Sputtering

P-Type Transparent Conducting Indium-Tin Oxide Thin Films Deposited By Spray-Pyrolysis

Abnormal Behaviors in Electrical Transport Properties of Cobalt-Doped Tin Oxide Thin Films

Transparent P-Type Conducting Indium-Doped SnO2 Thin Films Deposited by Spray Pyrolysis

P-type Tin–indium Oxide Films Prepared by Thermal Oxidation of Metallic InSn Alloy Films

Magnetron-Sputtered SnO Thin Films for p-Type and Ambipolar TFT Applications

Study Of Dc Sputtered Sno Growth And Its Applications In Thin Film Transistors

A study on phase transformation of SnOx thin films prepared by reactive magnetron sputtering

Compositional changes between metastable SnO and stable SnO 2 in a sputtered film for p-type thin-film transistors

Influence of Post-Deposition Annealing on the Novel Alloyed SnSxO1-x Semiconductor in P-Type Thin-Film Transistors

Preparation and characterization of SnO films via reactive sputtering for ambipolar thin-film transistor applications

Tunable Electrical Properties of NiO Thin Films and P-Type Thin-Film Transistors

Conversion of p-type SnO to n-type SnO 2 via oxidation and the band offset and rectification of an all-Tin oxide p-n junction structure

Stoichiometry Dependence of Physical and Electrochemical Properties of the SnOx Film Anodes Deposited by Pulse DC Magnetron Sputtering

Deposition Mechanism and Characterization of Plasma-Enhanced Atomic Layer-Deposited SnOx Films at Different Substrate Temperatures

Reactive Radiofrequency Sputtering-Deposited Nanocrystalline ZnO Thin-Film Transistors

Reaction mode-controlled crystal structure and optical and electrical properties of SnOx infrared transparent conducting films

Resistance Switching Characteristics of DC Magnetron Sputtered SnO2 Films

P-Type ZnO Thin Films Fabricated by Dc Magnetron Reactive Sputtering Method at Different Substrate Temperatures

Highly Dense and Stable p-Type Thin-Film Transistor Based on Atomic Layer Deposition SnO Fabricated by Two-Step Crystallization