Abstract:The high-voltage dis-connector, as a key substation equipment in the power grid structure, is vitally important to the quality of the power grid operation. Due to the geographic location of Guangdong Province of China, many strong typhoons have caused great damage to power facilities in recent years. And the loss of the dis-connector is the most serious, which severely affects the reliability of the power supply. However, the research on the wind resistance of the dis-connector is still few, so the improvement work of the device is quite difficult. The phenomenon of strong typhoon destroying the dis-connector mainly includes the fracture of post insulator and the conductive arm. In the study of the mechanical properties of post insulator and the conductive arm, almost all wind loads are treated as a concentrated force, but the surfaces of the post insulator and the conductive arm are actually subjected to a continuous wind pressure distribution. The magnitude of the wind load and the error of its application method will inevitably lead to inaccurate stress and strain data obtained in the calculation of the strength of the post insulator and the conductive arm, so that the post insulator and the conductive arm cannot be accurately designed. In this paper, the wind resistance of the dis-connector are studied by using the fluid-structural coupling analysis method. Firstly, the hydrodynamic RNG k-ε turbulence model is used to simulate the wind field around the dis-connector, so as to obtain the accurate result of the wind pressure distribution on the surface of the dis-connector. Then the surface pressure of the dis-connector calculated by hydrodynamics simulation is introduced into the structural module of Ansys software as the applied load. The finite element method is used to simulate and calculate the stress and strain of the dis-connector, so as to obtain the mechanical characteristics of the dis-connector under strong wind. In addition, this paper analyzes the effects of different wind speeds and different wind directions on the wind load applied to the surface of dis-connector, and provide a basis for wind resistance design of dis-connector.

Improved calculation model for swing angle of suspension insulator string

Study on Flashover of Suspension Insulator String Caused by Windage Yaw in 500kV Transmission Lines

Impact of SVC Control Mode on Voltage Abnormal Oscillation in Wind Power Influx Area

Discussion on Wind-induced Swing Flashover and Conductor Wind Load of EHV Transmission Lines

Calculation Method of Wind-induced oscillation of Transmission Line Under Moving Downburst

Study on the Wind Deviation Characteristics of Y-Type Insulator String under the Action of Strong Wind

An Improved Rigid Rod Method for Wind-Induced Swing Response Prediction of Heavily Iced Transmission Lines

Approaching to Rotated Lightning Strike on Transmission Line

Study of Dynamic Response of Overhead Transmission Lines to Different Wind Speeds

Research on Influencing Factors and Wind Deflection Warning of Transmission Lines Based on Meteorological Prediction

Voltage Distribution Analysis of High Dv/dt Fed Machines Using High Frequency Winding Model

Simulation Study on Wind Load and Mechanical Characteristics of High Voltage Dis-Connector

Electrical field calculation and optimization of suspension insulator with cone conformation in valve hall

Online Early Warning Model of Windage Yaw Discharge on Transmission Lines Based on Monte Carlo Random Sampling

Numerical Simulation of Windage Yaw of Overhead Transmission Lines

Improvement of Electro-geometric Model with Considering Lightning Strike Angle

Effect of Motion Path of Downburst on Wind-Induced Conductor Swing in Transmission Line

Characteristics Analysis of Conductors Diaplacement under Different Wind Speeds

Wind-induced swing investigation on transmission line jumper wire under hilly terrain

Voltage Stability Margin Model for Power Systems Containing Wind Energy Resources

Wind and ice loading risk model and fuzzy forecast for overhead transmission lines