Wind-induced Flashover Incident Analysis of Jumper Considering the Effect of Typhoon and Mountainous Topography
CHEN Keji,BIAN Rong,ZHOU Weizheng,LOU Wenjuan,XU Haiwei
DOI: https://doi.org/10.13336/j.1003-6520.hve.20221062
2023-01-01
Abstract:A wind-induced flashover incident involving a circuitous jumper on a 500 kV transmission line is researched,and a refined finite element numerical model of jump lines is established. The harmonic-wave superposition method is used to simulate the synoptic wind speed with six different turbulence intensities adapted to flat terrain, and the large eddy simulation is used to simulate the typhoon wind speed adapted to realistic mountainous microtopography. The peak factor,root mean square and extreme value of jumper swing response in seven wind fields are calculated, respectively, to analyze the effect of turbulence intensity on the typhoon wind field. The wind-induced swing morphology of jumper shows that the wind-induced swing should be judged based on the displacement of quarter-span instead of the insulator string. The displacement of the jumper is significantly affected by the high turbulence intensity during the typhoon, and the root-mean-square of the jumper displacement in the middle span is almost linearly correlated with the incoming turbulence intensity. A fitting formula for the extreme value of jumper swing response in the middle span is proposed. In mountainous microtopography, the wind field is affected by realistic microtopography such as terrain uplift and the effect of narrow, and the mean wind speed increases significantly, while the fluctuating wind speed does not change much or even decreases. The wind-induced swing response of jumper in the microtopography, which has less turbulence intensity than in flat terrain, still increases significantly, indicating that the microtopography has a significant amplifying effect on the wind speed. The minimum gap between the jumper and the tower is only 0.65 m according to the simulation, which is less than 1.2 m in specification. The results of the large eddy simulation show that the design wind speed at 10 m height can be amended by 1.5 times due to the effect of the mountainous microtopography, that is, to enhance the design wind speed to 40 m/s, which can satisfy the requirements of the jumper against wind-induced swing incidents.