Calculation Method of Wind-induced oscillation of Transmission Line Under Moving Downburst

LOU Wenjuan,WANG Jiawei,L Zhongbin,ZHANG Shaofeng,CHEN Yong
DOI: https://doi.org/10.13334/j.0258-8013.pcsee.2015.17.031
2015-01-01
Abstract:Wind induced flashover accidents of transmission lineoccur frequently during the thunderstorm, thus an appropriate method for the calculation of wind-induced deflection angle is need to be built. Based upon a revised model of downburst and considering spatial correlation together with non-steady characteristics of the wind field, three-dimensional transient wind field of the whole transmission line during the motion process of downburst was obtained with the application of vector synthesis method. Then the wind load distribution along the transmission line was built. In combination with non-linear finite element analysis method, a numerical simulation method for wind-induced oscillation analysis of the transmission line under moving downburst was developed. According to an actual 500kV transmission line strain section consisted of eight spans, a precise finite element model was established. Subsequently, the response of the studied line section was earned by the non-linear transient dynamic calculation. The results show that:when downburst moves towards the transmission line perpendicularly, the deflection angles of insulator strings change sharply in several minutes, with a positive maximum value approximately 56 degrees and a negative maximum value approximately 20 degrees; meanwhile, it is found that the peak angles of all insulator strings which locate in the diameter range of downburst exceed the calculation results of the static model in the boundary layer with a same 3 s gust speed at the 10 m height.
What problem does this paper attempt to address?