Abstract:Mg-RE (magnesium-rare earth) alloys exhibit pronounced in-plane anisotropy of mechanical response under quasi-static monotonic loading resulting from the RE texture, as extensively reported. In this work, an obvious in-plane anisotropy of cyclic deformation behavior was observed in an extruded Mg-3Y alloy sheet during strain-controlled tension-compression low-cycle fatigue (LCF) at room temperature. The extrusion direction (ED) samples displayed better fatigue resistance with almost symmetrical hysteresis loops and longer fatigue life compared with the transverse direction (TD) samples. The influences of texture on the deformation modes, cracking modes, and mechanical behavior of Mg-Y alloy sheets under cyclic loading were studied quantitatively and statistically. The activation of various slip/twinning-detwinning systems was measured at desired fatigue stages via EBSD observations together with in-grain misorientation axes (IGMA) analysis. The results indicate that the activation of deformation modes in the TD sample was featured by the cyclic transition, i.e., prismatic slip (at the tensile interval) →{10–12}tension twinning (at the compressive reversal) → detwinning + prismatic slip (at the re-tensile reversal). In the case of the ED sample, the cyclic deformation was dominated by the basal slip throughout the fatigue life. For cracking modes, intergranular cracking and persistent slip bands (PSB) cracking were the primary cracking modes in the ED sample while the TD sample showed a high tendency of {10–12} tension twinning cracking (TTW cracking). The underlying mechanisms influencing the activation of various slip/twinning-detwinning systems, as well as cracking modes and cyclic mechanical behavior, were discussed.

Effect of texture symmetry on mechanical performance and corrosion resistance of magnesium alloy sheet

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Influence of texture on the corrosion behavior of an as-extruded Mg–8Al-0.5In alloy sheet

Effect of texture evolution on corrosion resistance of AZ80 magnesium alloy subjected to applied force in simulated body fluid

Improving the tension-compression asymmetry of ZK61 magnesium alloy through texture optimization in combined extrusion

The Effect of Texture on the Corrosion Behavior of AZ31 Mg Alloy

High corrosion resistance and weak corrosion anisotropy of an as-rolled Mg-3Al-1Zn (in wt.%) alloy with strong crystallographic texture

Combined-extrusion techniques for fabricating yield-symmetric ZK61 magnesium alloys rods focusing on texture influence on their mechanical responses

Texture and Its Effect on Mechanical Properties of AZ31 Magnesium Alloy

Anisotropy of the Crystallographic Orientation and Corrosion Performance of High-Strength AZ80 Mg Alloy

Effect of Icosahedral Phase on Crystallographic Texture and Mechanical Anisotropy of Mg–4%Li Based Alloys

Anisotropic cyclic deformation behavior of an extruded Mg-3Y alloy sheet with rare earth texture

Adjusting Approaches of Basal Texture for Improvement of Tension-Compression Asymmetry in Extruded Magnesium Alloys

Effect of pre-solution treatment on the texture and the mechanical properties of hot-extruded Mg-2.6Nd-0.55Zn-0.5Zr alloys

Effect mechanism of texture orientation on mechanical properties and Hall-Petch relationship of CVCDE AZ31 magnesium alloy via crystal plastic finite element method (CPFEM)

The texture and its optimization in magnesium alloy

Modified Texture and Room Temperature Formability of Magnesium Alloy Sheet by Li Addition

Role of bimodal-grained structure with random texture on mechanical and corrosion properties of a Mg-Zn-Nd alloy

Effects of Asymmetric Basal Texture on the Stretchability and the Microstructure Variations for the Rolled ZK60 Magnesium Alloy Sheet

Effects of Bimodal Basal Texture on Bending Stress and Microstructure Evolution of Mg-2.6Nd-0.55Zn-0.5Zr Alloys

Evading Strength-Ductility Tradeoff in Mg Alloy via Uniform Microstructure and Unique Texture Modification Induced by Moderate Temperature ECAP