Abstract:Influence of texture type on mechanical properties and the evolution of microstructure and texture is thoroughly investigated via uniaxial tension experiment along rolling direction (RD) at room temperature on two different AZ31 alloy sheets. Electron backscattered diffraction (EBSD) measurements on deformed samples confirm that dislocation slip is the main deformation mechanism in as-received sheet with a typical basal texture, while dislocation slip and extension twinning (ET) both contribute to sustaining plastic strain in the sheet with a rare RD-split bimodal texture, which is fabricated by equal channel angular rolling and continuous bending process with subsequent annealing (ECAR-CB-A). Therefore, these two sheets demonstrate obviously different texture evolution during plastic deformation. As-received sheet maintains basal texture and further experience the concentration of basal poles towards normal direction (ND). However, ECAR-CB-A sheet not only undergoes the gradual diffusion and rotation of tilted basal poles to ND but also the development of a new TD-component texture. The activation of ET variants in ECAR-CB-A sheet is confirmed to play an important role in texture evolution, and the number of activated ET variants is increasing with the increase of angle between ND and c-axis. In addition, acquired mechanics data demonstrate that ECAR-CB-A sheet possesses higher fracture elongation (24%) and lower yield stress (73 MPa) as compared to as-received sample. This issue can be ascribed to the participation of ET to coordinate plastic deformation along c-axis and the easier activation of basal slip in ECAR-CB-A sheet.

The Effect of Texture on the Corrosion Behavior of AZ31 Mg Alloy

Effects of grain size and Al-Mn phase on the corrosion performance of hot-rolled AZ31 magnesium alloy

High corrosion resistance and weak corrosion anisotropy of an as-rolled Mg-3Al-1Zn (in wt.%) alloy with strong crystallographic texture

Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy

Influence of texture on the corrosion behavior of an as-extruded Mg–8Al-0.5In alloy sheet

Study of Effects of Initial Texture on the Microstructure and Texture for Hot Rolled AZ31 Mg Alloy Sheet Using EBSD

Effect of texture evolution on corrosion resistance of AZ80 magnesium alloy subjected to applied force in simulated body fluid

Influence of Hot Rolling on Microstructure, Corrosion and Mechanical Properties of Mg–Zn–Mn–Ca Alloy

Role of bimodal-grained structure with random texture on mechanical and corrosion properties of a Mg-Zn-Nd alloy

Anisotropy of the Crystallographic Orientation and Corrosion Performance of High-Strength AZ80 Mg Alloy

The effect of grain size on texture evolution and mechanical properties of an AZ31 magnesium alloy during cold-rolling process

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Effect of grain size uniformity and crystallographic orientation on the corrosion behavior of Mg-2Zn-1Al bar

The synergistic effects of texture and continuous precipitates on the corrosion resistance of AZ80 magnesium alloy

Effect of rolling temperature on microstructure and mechanical properties of hot-rolled Mg-Al-Ca-Zn-Mn alloys

Effect of Surface Roughness on Pitting Corrosion of AZ31 Mg Alloy

Study of grain orientation effect on the corrosion behavior of biocompatible magnesium alloy Mg-2Zn-0.5Ca

Effect of Rolling Treatment on Microstructure, Mechanical Properties, and Corrosion Properties of WE43 Alloy

Effect of annealing treatment on the microstructure and mechanical properties of warm-rolled Mg–Zn–Gd–Ca–Mn alloys

Microstructure, Texture Evolution, and Mechanical Properties of Thin AZ31B Mg Alloy Sheets Prepared by Two-Stage Rolling