Abstract:In order to improve the oxidation and ablative properties of C/C composites, ZrB2-SiC-HfB2-TaSi2 coating was prepared on the surface of C/C composites by atmospheric plasma spraying. By means of microstructure analysis and phase structure analysis, the difference of the spray powder before and after IPS treatment and the microstructure and oxidation ablation resistance of the coating were studied. The results show that the IPS treated powder has better fluidity and densification. In the coating, part of ZrB2 and HfB2 exist in the form of unmelted particles, another part exists in the form of intermediate solid solution (Zr, Hf)B2, and TaSi2 exists in the particle gap. The linear ablation rate and mass ablation rate of the coating are −1.513 × 10−4 mm/s and 2.842 × 10−4 g/s, respectively, measured under the condition of oxygen acetylene heat flux of 1.8 MW/m2, 180 s were ablated. The coating has good ablative resistance, and TaSi2 can form dense Zr-Ta-O and Hf-Ta-O oxides with Zr and Hf elements. The Ta-Si-O glass phase can effectively seal the holes of the coating to prevent oxygen penetration. During the ablation process, the oxidation of (Zr,Hf)B2 also plays a certain role in the formation of densification zone on the coating surface.

Ablation Resistance of HfB2-SiC Coating Prepared by In-Situ Reaction Method for SiC Coated C/C Composites

WSi2 modified HfB2-SiC coating: Microstructure and ablation resistance

Ablation mechanism and morphology evolution of the HfC-SiC coating for C/C composites deposited by supersonic atmospheric plasma spraying

UHTC coating reinforced by HfC nanowires against ablation for C/C composites

Cyclic ablation resistance at 2300 °C of (Hf0.4Zr0.4Ta0.2)B2-SiC-Si coating for C/SiC composites prepared by SiC-assisted reactive infiltration of silicon

Mechanical properties and ablation resistance of La2O3-modified HfC-SiC coating for SiC-coated C/C composites

TaSi2 modified HfB2‐SiC coating: preparation and ablation behavior

Self-densification behavior, interfacial bonding and cyclic ablation resistance of HfSi2-ZrSi2 modified SiC/ZrB2-SiC/SiC coating for Cf/SiC composite

Investigation on the oxidation and ablation behaviors of HfB2-SiC-Si/SiC-Si coatings for carbon/carbon composites

Improvement of ablation resistance of CVD-HfC/SiC coating on hemisphere shaped C/C composites by introducing diffusion interface

High-quality SiC-HfC coating with interpenetrating structure based on a two-step low temperature molten salt method

Oxidation ablation resistance of ZrB2-HfB2-SiC-TaSi2 coating prepared on C/C composite surface

Microstructure and ablation behavior of C/C–HfC–SiC composites fabricated by reactive melt infiltration with Hf–Si alloy

Effect of SiCnws@BN core shell upon impact-ablation performance of HfC coating on C/C composites

Ablation behavior of ZrC-SiHfOC-MoSi 2 coating for carbon/carbon composites under Ar-O 2 plasma flame

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating

Ablation behavior of C/C–Zr1-xHfxC-SiC composites under an oxyacetylene flame at above 2500 °C

Effect of HfC addition on ablation behavior of SiBCN ceramics

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

MoSi2-HfC/TaC-HfC multi-phase coatings synthesized by supersonic atmospheric plasma spraying for C/C composites against ablation