Abstract:Introducing a carbon single coating is a popular method used to protect SiCf/Ti composites from severe interface reactions. However, carbon coatings lose their protective effect on SiC fibres at high temperature, even after a short period time. As such, given the strong demand for high temperature applications in aeronautics and astronautics a more coating which is more effective at high temperatures is desirable. In order to improve the high temperature interfacial stability of SiCf/Ti composites, a C/TiCx duplex coating system with different C contents in TiCx was introduced to explore the protection of fibres at 1200 C for 1 h. The results show that the C/quasistoichiometric TiC coating system protects the SiC fibres most effectively. Based on insights from the evolution of the interface structure, TiCx has been identified as an interfacial reaction product from the C single coating, exhibiting a gradient in C content and grain size, which is different from a deposited TiC layer with a well distributed composition and structure. The different coating structure gives rise to different ability to resist C diffusion at high temperatures, in which poor resistance ability appears in TiCx interfacial reaction layer coming from C single coating due to short-circuit diffusion in C-rich fine-grained TiC layer and fast intracrystalline diffusion trigged by amounts of vacancies in sub-stoichiometric coarse-grained TiC layer. Therefore, C/quasistoichiometric TiC duplex coatings with a thick, coarse-grained quasi-stoichiometric TiC layer could effectively inhibit C diffusion by comparison to C single coatings, and is more effective than C/rich-carbon TiC duplex coatings due to the existence of short-circuit diffusion in the latter. As such, C/quasi-stoichiometric TiC duplex coatings appear to be an optimal diffusion barrier for SiCf/Ti composites at high temperature.

Improvement of ablation resistance of CVD-HfC/SiC coating on hemisphere shaped C/C composites by introducing diffusion interface

Self-densification behavior, interfacial bonding and cyclic ablation resistance of HfSi2-ZrSi2 modified SiC/ZrB2-SiC/SiC coating for Cf/SiC composite

Ablation mechanism and morphology evolution of the HfC-SiC coating for C/C composites deposited by supersonic atmospheric plasma spraying

SiC Nanowires Toughed HfC Ablative Coating for C/C Composites

High-quality SiC-HfC coating with interpenetrating structure based on a two-step low temperature molten salt method

Influences of deposition temperature, gas flow rate and ZrC content on the microstructure and anti-ablation performance of CVD-HfC-ZrC coating

Microstructure and ablation behavior of C/C–HfC–SiC composites fabricated by reactive melt infiltration with Hf–Si alloy

Effect of HfC addition on ablation behavior of SiBCN ceramics

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Optimization of C/TiC Duplex Diffusion Barrier Coatings for SiC /ti Composites Based on Interfacial Structure Evolution Exploration

WSi2 modified HfB2-SiC coating: Microstructure and ablation resistance

Microstructure and ablation resistance of C/C-HfC-SiC composites prepared by RMI with different powder particle sizes

Investigation on the oxidation and ablation behaviors of HfB2-SiC-Si/SiC-Si coatings for carbon/carbon composites

UHTC coating reinforced by HfC nanowires against ablation for C/C composites

Effect of PyC-SiC double-layer interface on ablation behaviour of impacted CVD-SiCnws/HfC coating

Ultra-high temperature ablation behavior of CVD-Hf 5 TaC 6 solid solution ceramic coating for C/C composites: Experiment and first-principle calculation

Cyclic ablation resistance at 2300 °C of (Hf0.4Zr0.4Ta0.2)B2-SiC-Si coating for C/SiC composites prepared by SiC-assisted reactive infiltration of silicon

Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating

Mechanical properties and ablation resistance of La2O3-modified HfC-SiC coating for SiC-coated C/C composites

Flexural properties of cyclic ablated SiCf/HfC-SiC composites

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites