Abstract:Environmental effects on 980 °C high temperature creep response of thin-walled Ni-based single crystal superalloys were isolated by testing in air and vacuum, respectively. For each gaseous environment, different stress levels and specimen thicknesses were considered. Results showed that the creep rupture life reduced at 275 MPa in both air and vacuum, when the specimen thickness decreased from 1.3 to 0.5 mm. The reduction in life was more obvious in air than that in vacuum. At 330 MPa, the variation tendency of creep life with the specimen thickness was not evident in both gaseous environments. In the air environment, metallographic analyses indicated that oxidation effect, voids and cracks growth could affect the creep response of thin-walled specimens. Cracks propagation in air exhibited a go-stop mode, which was the competition result of air strengthening and air weakening. The former was dominant under the low stress, while the latter was dominant under the high stress. Phase-field analyses pointed out that the existence of multilayer structure caused by the oxidation effect led to larger plastic strain in the normal γ / γ ′ phase region. And this was more serious in the thin specimen with relatively wider oxidation layers. In the vacuum environment, only the crack growth contributed to different creep lives in thin-walled specimens. Cracks in vacuum continued to grow in the whole propagation process. Once their length reached the critical value, cracks would grow dramatically in the thin specimen and finally led to the fracture of specimens.

Characterizing the Effect of Creep on Stress Corrosion Cracking of Cold Worked Alloy 690 in Supercritical Water Environment

Effect of Cold Work on the Stress Corrosion Cracking Behavior of Alloy 690 in Supercritical Water Environment

Comparison of the Stress Corrosion Cracking Growth Behavior of Cold Worked Alloy 690 in Subcritical and Supercritical Water

Effect of Intergranular Carbides on the Cracking Behavior of Cold Worked Alloy 690 in Subcritical and Supercritical Water

The cracking growth behavior of a sensitized Alloy 800H in supercritical water

Characterizing the Effects of In-Situ Sensitization on Stress Corrosion Cracking of Austenitic Steels in Supercritical Water

The Effects of Grain Boundary Carbide Density and Strain Rate on the Stress Corrosion Cracking Behavior of Cold Rolled Alloy 690

Stress Corrosion Crack Growth Behavior of Type 310S Stainless Steel in Supercritical Water

Microstructural Study on the Stress Corrosion Cracking of Alloy 690 in Simulated Pressurized Water Reactor Primary Environment

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Insights into the stress corrosion cracking of solution annealed alloy 690 in simulated pressurized water reactor primary water under dynamic straining

On the role of intergranular nanocavities in long-term stress corrosion cracking of Alloy 690

Strain Rate Dependence of the Effect of Intergranular Carbides on the Resistance to Stress Corrosion Cracking Initiation of Alloy 690 in Simulated Pwr Primary Water

The Mechanism of Creep during Crack Propagation of a Superalloy under Fatigue–Creep–Environment Interactions

Effect of different loading conditions on corrosion fatigue crack growth rate of a nickel-based alloy in supercritical water

A High-Resolution Characterization of the Initiation of Stress Corrosion Crack in Alloy 690 in Simulated Pressurized Water Reactor Primary Water

The Effect of Nano-Sized Precipitates on Stress Corrosion Cracking Propagation of Alloy 718 under Constant Loads in PWR Primary Water

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

CRACK GROWTH BEHAVIOR FOR STRESS CORROSION CRACKING OF 690 ALLOY IN HIGH TEMPERATURE WATER

Environmental Effects on the Creep Response of Thin-Walled Ni-Based Single Crystal Superalloys

Stress corrosion crack initiation in Alloy 690 in high temperature water