Abstract:Under supercritical carbon dioxide (SCO 2 ) conditions, stress corrosion cracking (SCC) of steel can significantly degrade their mechanical properties and shorten their service life. However, few studies have been focused on predicting such property degradation. This study investigates the degradation of mechanical properties of Fe–C alloys induced by SCC in SCO 2 environments by using ReaxFF molecular dynamics (MD) simulation and machine learning (ML) algorithms. The considerations are given to the effect of factors including C content in the Fe–C alloy, the density of CO 2 , temperature, and strain rate. These factors are varied to generate 625 different conditions. MD results reveal that the corrosion happens with O atoms penetrating deeply into the metal while C atoms aggregated in the subsurface layer to form a carbon/iron mixed region, inhibiting further corrosion. However, the applied tensile stress exposes the new metal matrix to the CO 2 environment and thereby facilitates further corrosion reactions. It is interesting that initial stress in the tensile direction is negative at the beginning of the tensile deformation, which is due to that the corrosion induces compressive stress in the corroded regions. Based on the stress–strain curves obtained in MD simulation, key mechanical parameters are extracted, including the initial stress before tensile deformations, modulus of elasticity, and ultimate tensile strength. The best-performing ML models for each parameter are trained and demonstrate good predictive performance in unknown conditions with R 2 > 0.9. The theoretical framework proposed can assist in evaluating the performance and service life of materials in extreme environments.

Understanding the stress corrosion cracking growth mechanism of a cold worked alumina-forming austenitic steel in supercritical carbon dioxide

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Corrosion Behavior of Alumina-Forming Austenitic Steel in Supercritical Carbon Dioxide Conditions: Effects of Nb Content and Temperature

Irradiation accelerated corrosion of alumina-forming austenitic steels in supercritical CO 2 : the oxide scale formed within an individual grain or affected by grain boundary

Corrosion behavior of a new alumina-forming duplex stainless steel with different surface treatment in supercritical carbon dioxide

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Dynamic strain aging behavior of an advanced alumina-forming austenite stainless steel based on Fe-30Ni-15Cr-3.5Al

10000 Hours Thermal Aging Behavior and Supercritical CO2 Corrosion Performance of Candidate Cladding AFA Alloys for Novel Gas - Cooled Reactors

Comparison of the corrosion of materials in supercritical carbon dioxide, air, and argon environments

New insights into the initial oxidation behavior of an ultra-corrosion resistant alumina-forming austenitic steel in supercritical carbon dioxide: the effects of precipitated intragranular intermetallic compounds

10000 hours thermal aging behavior and supercritical CO 2 corrosion performance of candidate cladding AFA alloys for novel gas - cooled reactors

The cracking growth behavior of a sensitized Alloy 800H in supercritical water

Strengthening and fracture mechanisms of Fe–20Ni–14Cr–2Cu alumina-forming austenitic steel during creeping

Effects of Corrosion in Supercritical CO2 on the Microstructural Evolution in 800H Alloy

Effect of Organizational Evolution on the Stress Corrosion Cracking of the Cr-Co-Ni-Mo Series of Ultra-High Strength Stainless Steel

Effect of Supercritical CO2 on Steel Ductility at 450°-650°C

On the role of mechanical deformation in the environmental degradation of 310S stainless steels in supercritical carbon dioxide

STRESS CORROSION CRACKING BEHAVIOR OF A NEW KIND OF ULTRAHIGH STRENGTH STEEL Cr12Ni4Mo2Co14 IN ACID ENVIRONMENT

Mechanical degradations of Fe–C alloys induced by stress corrosion in supercritical CO2 environments: a study based on molecular dynamics simulation and machine learning

Influence of High-temperature Oxidation on Creep-Fatigue Crack Growth of 30cr1mo1v Steels

High Temperature Deformation Characteristics of an Alumina‐Forming Stainless Steel