Abstract:Environmental effects on 980 °C high temperature creep response of thin-walled Ni-based single crystal superalloys were isolated by testing in air and vacuum, respectively. For each gaseous environment, different stress levels and specimen thicknesses were considered. Results showed that the creep rupture life reduced at 275 MPa in both air and vacuum, when the specimen thickness decreased from 1.3 to 0.5 mm. The reduction in life was more obvious in air than that in vacuum. At 330 MPa, the variation tendency of creep life with the specimen thickness was not evident in both gaseous environments. In the air environment, metallographic analyses indicated that oxidation effect, voids and cracks growth could affect the creep response of thin-walled specimens. Cracks propagation in air exhibited a go-stop mode, which was the competition result of air strengthening and air weakening. The former was dominant under the low stress, while the latter was dominant under the high stress. Phase-field analyses pointed out that the existence of multilayer structure caused by the oxidation effect led to larger plastic strain in the normal γ / γ ′ phase region. And this was more serious in the thin specimen with relatively wider oxidation layers. In the vacuum environment, only the crack growth contributed to different creep lives in thin-walled specimens. Cracks in vacuum continued to grow in the whole propagation process. Once their length reached the critical value, cracks would grow dramatically in the thin specimen and finally led to the fracture of specimens.

The cracking growth behavior of a sensitized Alloy 800H in supercritical water

New Insights of the Microcrack Initiation Induced by Mo Addition in Ni-based Single Crystal Superalloys During Creep at 900 °C

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Quantitatively evaluating the contribution of intergranular carbides, Cr-depleted zone, and grain boundary to intergranular stress corrosion cracking of Alloy 600 in a simulated boiling water reactors environment with high oxygen concentrations

Effects of heat treatment on corrosion fatigue and stress corrosion crack growth of additive-manufactured Alloy 800H in high-temperature water

Creep crack growth of GH3535 alloy at elevated temperatures

Understanding the stress corrosion cracking growth mechanism of a cold worked alumina-forming austenitic steel in supercritical carbon dioxide

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

Environment assisted cracking of 308L weld metal in high temperature water

Investigation on the corrosion behavior of Alloy 800H at various levels of deformation

Effect of different loading conditions on corrosion fatigue crack growth rate of a nickel-based alloy in supercritical water

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Microstructural understanding of the oxidation and inter-diffusion behavior of Cr-coated Alloy 800H in supercritical water

The Mechanism of Creep during Crack Propagation of a Superalloy under Fatigue–Creep–Environment Interactions

Sensitization, desensitization, and carbide evolution of Alloy 800H made by laser powder bed fusion

Effect of dissolved oxygen and hydrogen on the stress corrosion cracking behavior of alloy 600 in high temperature water

Corrosion and creep behavior of a Ni-base alloy in supercritical-carbon dioxide environment at 650 °C

Stress corrosion crack initiation in Alloy 690 in high temperature water

Competitive deformation induced by TCP precipitation and creep inconsistency on dendritic structures in a nickel-based single crystal superalloy crept at high temperatures

Environmental Effects on the Creep Response of Thin-Walled Ni-Based Single Crystal Superalloys

Experimental Method for Creep Crack Growth Testing in Controlled Environments at High Temperatures