Abstract:Indium-doped ZnO nanoparticles were synthesized by co-precipitation method using zinc nitrate hexahydrate and Indium (III) nitrate hydrate as precursor. Co-precipitation of indium-doped ZnO with various indium dopant concentrations 0–5 wt.% were obtained by calcination process at 500 °C for 2 h. The effects of indium additive in ZnO host lattice on structural, optical and electrical properties have been investigated by X-ray diffraction (XRD), Scanning electron microscopy (FE-SEM), Energy Dispersive Spectroscopy (EDS), Diffuse Reflectance Spectroscopy (DRS) and four-point probe. XRD results reveal that all Indium-doped ZnO nanoparticles have a single phase hexagonal wurtzite structure. The position of the main diffraction peak of ZnO shifted slightly toward small angle with grain size from 210 to 430 nm. SEM images indicated that the dopant of indium affected the surface morphology of ZnO nanoparticles. The incorporation of indium ions up to 4–5 wt.% reveals that ZnO host matrix can be transformed into the rod-like structure. The element composition in weight percentage of Zn, O and In were presented using EDS element mapping analysis. The results confirmed that the incorporation of indium is doped into the ZnO host matrix with a quite uniform distribution. The optical properties were examined by DRS. The optical transmittance decreases when the indium dopant increases. The absorption band edges also moved toward the longer wavelength as increasing the indium additives. The results indicated that the incorporation of In 3+ ions replaces Zn 2+ ions in host ZnO led to an increase in the defects inside ZnO. The calculated bandgap indium-doped ZnO decreased from 3.01 to 2.86 eV when indium dopant increased from 0 to 5 wt.%. The sheet resistance of indium-doped ZnO was observed by four-point probe measurement in room temperature. The electrical transport results suggested that n-doped by incorporation of 3 wt.% significantly affected the good conducting formation of ZnO.

Preparation and Optical Properties of Sn- and Ga-doped Indium Oxide Semiconductor Nanoparticles

Surface Pattern and Optical Properties of In-doped ZnO Thin Films by Hydrothermal Method

Zn-doped SnO2 Nanoparticles: Structural, Optical, Dielectric and Magnetic Properties

Tunable Surface Plasmon Resonance Frequencies of Monodisperse Indium Tin Oxide Nanoparticles by Controlling Composition, Size, and Morphology

Preparation and Electrical Properties of Electrospun Tin-Doped Indium Oxide Nanowires

Effects of pH value and calcining temperature on indium tin oxide nanopowder synthesized by co-precipitation

Preparation and characterization of indium-doped tin dioxide nanocrystalline powders

Improvement of structural, optical and electrical properties of indium-doped ZnO nanoparticles synthesized by Co-precipitation method

Synthesis of Tin-Doped Indium Oxide Nanoparticles by an Ion-Exchange and Hydrothermal Process

Solvothermal Preparation and Characteristics of Sn-doped In2O3

Stability of Indium–tin-Oxide and Its Optical Properties: A First-Principles Study

Photoluminescence properties of hexagonal indium tin oxide nanopowders prepared by solvothermal method

Preparation of Sn-doped In2O3 Nanopowders by a Solvothermal Process

Preparation of Nano-Powders of ITO

Effects of Indium Doping Concentration on the Morphology and Electrical Properties of One-Dimensional SnO2 Nanostructures Prepared by a Molten Salt Method

The preparation, electrical and optical properties of indium doped ZnO conductive nanoparticles

Mobility enhancement of p-type SnO<sub>2</sub>by In-Ga co-doping

Preparation and Study of Properties of Indium-Doped ZnO Films on Si Substrates

In-situ Growth of Highly Monodisperse ITO Nanoparticles Regulated by Mesoporous Silica Glasses

Preparation and Characterization of Nanosize Indium-Tin-Oxide Powder by Chemical Co-precipitation

Molecular Mechanism of Monodisperse Colloidal Tin-Doped Indium Oxide Nanocrystals by a Hot-Injection Approach.