Abstract:In order to improve the strength of Cu/Al2 O3 joint, vacuum brazing of copper to Al2 O3 ceramic was performed using nano -Al2O3 strengthened AgCuTi composite filler ( abbreviated as AgCuTip filler ). The microstructure and mechanical performance of the brazed joint were investigated by scanning electron microscope ( SEM ) , energy dispersive spectrometer ( EDS ) and shear strength test. Typical interfacial microstructure of Cu/AgCuTip/Al2O3 brazed joint is Cu/diffusion layer/Cu-based solid solution + Ag-based solid solution+Ti2 Cu +Ti3( Cu, Al) 3 O/Al2 O3 . The addition of nano-Al2 O3 can improve the interfacial microstructure by inhibiting the growth of reaction layer near Al2 O3 ceramic side, and promoting the formation of dispersed Ti2 Cu phase in brazing seam. Moreover, both thickness of diffusion layer and Ti3(Cu, Al)3O reaction layer thickened with an increasing holding time. Excessive dissolution of copper was occurred when holding time reached 20 min, which deteriorated the performance of the brazed joint. The highest shear strength of 82 MPa can be obtained when brazed at 880 °C for 10 min. The addition of nano-Al2O3 particles can refine the microstructure of brazing seam and decrease the mismatch of coefficient of thermal expansion between substrates and brazing seam. Therefore, the performance of brazed joint can be improved. The holding time can affect the microstructure and thickness of reaction layer, thereby affect the strength of brazed joints.

Interfacial Microstructure and Mechanical Property of Brazed Copper/sio2 Ceramic Joint

Interfacial microstructure and mechanical properties of porous-Si3N4 ceramic and TiAl alloy joints vacuum brazed with AgCu filler

Microstructure and mechanical properties of Al2O3 ceramic and copper joints brazed with AgCuInTi brazing alloy

Improvement for Interfacial Microstructure and Mechanical Properties of Ti3SiC2/Cu Joint Brazed by Ag-Cu-Ti Filler with Copper Mesh

Effect of brazing temperature on interfacial microstructure and mechanical property of Ti60/AgCu/ZrO2 joint

Microstructure and Mechanical Property of Vacuum Brazed SiC Ceramic Joint

Effects of processing parameters on microstructure and mechanical behavior of SiO2/Ti–6Al–4V joint brazed with AgCu/Ni interlayer

Interfacial Microstructure and Mechanical Property of ZrC-SiC Ceramic and Ti6Al4V Joint Brazed with AgCuTi Alloy

Microstructure and Mechanical Property of Vacuum Brazed TiAl and C/SiC Joint

Interfacial Microstructure and Mechanical Properties of Pressureless Sintered SiC Ceramic and Stainless Steel Joints Brazed by AgCu/AgCuTi Alloy

Interface microstructure and mechanical properties of the brazed SiO2 glass ceramic and 30Cr3 high-tensile steel joint

Understanding the Microstructure Evolution Mechanism and the Microstructure-Strength Correlations of Ti3SiC2/Ti2AlNb Joint Brazed with AgCu Interlayer

Research on the interfacial structure and mechanical properties of TC4-SiO2 composite brazed joint

Interface microstructure and mechanism of SiC ceramic vacuum brazed joint

Microstructure and Performance of the Cu/Al2O3 Joint Brazed with Active Composite Filler

Microstructural Evolution of Si3n4/Ti6al4v Joints Brazed with Nano-Si3n4 Reinforced Agcuti Composite Filler

Interface structuce of ceramic/AgCuTi/stainless steel brazed joint

Vacuum Brazing of Cf/β–spodumene Composites and Ti–6Al–4 V Alloy Using Ag–Cu Filler Metal

Microstructure and Mechanical Properties of Al2O3/Cu Joints Brazed with Ag–Cu–Ti+Zn Composite Fillers

Microstructure and mechanical properties of the joint between Si3N4 and Mo brazed by near‐eutectic Ag‐Cu‐In‐Ti filler alloy

Microstructure and mechanical response of the SiO2f/SiO2 composite and Invar alloy joints brazed with an AgCuTi alloy