Abstract:The divertor first wall and neutral beam injection (NBI) components of tokamak devices require high heat flux removal up to 20–30 MW m−2 for future fusion reactors. The water cooled HyperVapotron (HV) structure, which relies on internal grooves or fins and boiling heat transfer to maximize the heat transfer capability, is the most promising candidate. The HV devices, that are able to transfer large amounts of heat (1–20 MW m−2) efficiently, have therefore been developed specifically for this application. Until recently, there have been few attempts to observe the detailed bubble characteristics and vortex evolvement of coolant flowing inside their various parts and understand of the internal two-phase complex heat transfer mechanism behind the vapotron effect. This research builds the experimental facilities of HyperVapotron Loop-I (HVL-I) and Pressure Water HyperVapotron Loop-II (PWHL-II) to implement the subcooled boiling principle experiment in terms of typical flow parameters, geometrical parameters of test section and surface heat flux, which are similar to those of the ITER-like first wall and NBI components (EAST and MAST). The multiphase flow and heat transfer phenomena on the surface of grooves and triangular fins when the subcooled water flowed through were observed and measured with the planar laser induced fluorescence (PLIF) and high-speed photography (HSP) techniques. Particle image velocimetry (PIV) was selected to reveal vortex formation, the flow structure that promotes the vapotron effect during subcooled boiling. The coolant flow data for contributing to the understanding of the vapotron phenomenon and the assessment of how the design and operational conditions that might affect the thermal performance of the devices were collected and analysed. The subcooled flow boiling model and methods of HV heat transfer adopted in the considered computational fluid dynamics (CFD) code were evaluated by comparing the calculated wall temperatures with the experimentally measured values. It was discovered that the bubble and vortex characteristics in the HV are clearly heavily dependent on the internal geometry, flow conditions and input heat flux. The evaporation latent heat is the primary heat transfer mechanism of HV flow under the condition of high heat flux, and the heat transfer through convection is very limited. The percentage of wall heat flux going into vapour production is almost 70%. These relationships between the flow phenomena and thermal performance of the HV device are essential to study the mechanisms for the flow structure alterations for design optimization and improvements of the ITER-like devices' water cooling structure and plasma facing components for future fusion reactors.

Experimental study of critical heat flux enhancement with hypervapotron structure under natural circulation conditions

Experimental Study of Hypervapotron under Conditions of High Heat Flux

Experimental Investigation on Heat Transfer Characteristics of a Novel Hypervapotron Channel for Divertor Target in Nuclear Fusion Reactors

Heat Transfer Characteristics of Subcooled Water in a Hypervapotron under High Mass Fluxes and High Heat Fluxes

Hierarchical Hypervapotron Structure Integrated with Microchannels for Advancement of Thermohydraulic Performance

Experimental Investigation on Critical Heat Flux Enhancement by Mixing-Vanes Spacer Grid in a Vertical Annular Geometry

Experimental Investigation on Critical Heat Flux of IVR-ERVC System under the Natural Circulation Condition

Experimental and Numerical Investigation of HyperVapotron Heat Transfer

CFD study on flow-boiling characteristics and predicting critical heat flux under natural circulation conditions of IVR-ERVC

Study of the Natural Circulation Flow Boiling Heat Transfer Based On Partially Superhydrophilic Surface Modification

Experimental and Theoretical Study on Liquid-Vapor Behavior Characteristics Near CHF

Critical heat flux measurement and visualization in R-134a on a vertical single rod with and without mixing-vanes spacer: The characteristics and phenomenon of critical heat flux

Critical Heat Flux Experiments for IVR-ERVC Strategy under the Pool Boiling Condition

Enhancing the Critical Heat Flux Using Microchanneled Surfaces

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Critical Heat Flux of Highly Subcooled Water Flow Boiling in Circular Tubes with and Without Internal Twisted Tapes under High Mass Fluxes

Experimental investigation of a new hybrid structured surface for subcooled flow boiling heat transfer enhancement

Investigation on the Critical Heat Flux in Typical 5 by 5 Rod Bundle at Conditions Prototypical of PWR Based on CFD Methodology

Evaluation of Passive Circulation Flow Characteristics and Chf under In-Vessel Retention

An experimental study of the CHF in a square channel with non-uniformly heated rod under low pressure and low flow conditions

Experimental Study on the Natural Circulation Subcooled Boiling of Square Channel in Fusion Reactor Blanket