Abstract:ZnO/Cu/ZnO trilayer films sandwiched between Cu and Pt electrodes were prepared for nonvolatile resistive memory applications. These structures show resistance switching under electrical bias both before and after a rapid thermal annealing (RTA) treatment, while it is found that the resistive switching effects in the two cases exhibit distinct characteristics. Compared with the as-fabricated device, the memory cell after RTA demonstrates remarkable device parameter improvements including lower threshold voltages, lower write current, and higher R-off/R-on ratio. A high-voltage forming process is avoided in the annealed device as well. Furthermore, the RTA treatment has triggered a switching mechanism transition from a carrier trapping/detrapping type to an electrochemical-redox-reaction-controlled conductive filament formation/rupture process, as indicated by different features in current-voltage characteristics. Both scanning electron microscopy observations and Auger electron spectroscopy depth profiles reveal that the Cu charge trapping layer in ZnO/Cu/ZnO disperses uniformly into the storage medium after RTA, while x-ray diffraction and x-ray photoelectron spectroscopy analyses demonstrate that the Cu atoms have lost electrons to become Cu2+ ions after dispersion. The above experimental facts indicate that the altered status of Cu in the ZnO/Cu/ZnO trilayer films during RTA treatment should be responsible for the switching mechanism transition. This study is envisioned to open the door for understanding the interrelation between different mechanisms that currently exist in the field of resistive memories.

Stable Nonpolar Resistive Switching Characteristics in Cu/Cu-dispersed ZrO2/Pt Memory Devices

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Reversible Transition of Volatile to Non-Volatile Resistive Switching in Cu/SiNx/ZnO/Pt Memristor

Nonpolar Nonvolatile Resistive Switching In Cu Doped Zro2

Improved Resistive Switching Stability of Pt/ZnO/CoO X /zno/pt Structure for Nonvolatile Memory Devices

Nonpolar Nonvolatile Resistive Switching in Cu Doped <formula formulatype="inline"> <tex>$\hbox{ZrO}_{2}$</tex></formula>

Resistive switching mechanism of Ag/ZrO 2 :Cu/Pt memory cell

On The Resistive Switching Mechanisms Of Cu/Zro2:Cu/Pt

Switching Mechanism Transition Induced by Annealing Treatment in Nonvolatile Cu/Zno/Cu/Zno/Pt Resistive Memory: from Carrier Trapping/Detrapping to Electrochemical Metallization

Bipolar and Tri-State Unipolar Resistive Switching Behaviors in Ag/ZnFe2O4/Pt Memory Devices

Low-Power and Highly Uniform Switching in $ \hbox{zro}_{2}$ -Based ReRAM with a Cu Nanocrystal Insertion Layer

Bistable Resistance Switching of Cu/Ti:ZrO2/Pt for Nonvolatile Memory Application

Mechanism For Resistive Switching In An Oxide-Based Electrochemical Metallization Memory

Stable resistive switching characteristics of ZrO2-based memory device with low-cost

Resistive switching mechanism of Cu doped ZrO2-based RRAM

Rectifying Switching Characteristics of Pt/ZnO/Pt Structure Based Resistive Memory.

Excellent Resistive Switching Characteristics of Cu Doped ZrO2 and Its 64 Bit Cross-Point Integration

Bipolar Resistive Switching in Cu/Aln/Pt Nonvolatile Memory Device

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Nonpolar Electrical Switching Behavior in Cu–Si(Cu)Ox–Pt Stacks

Bipolar Resistance Switching In High-Performance Cu/Zno : Mn/Pt Nonvolatile Memories: Active Region And Influence Of Joule Heating