Abstract:To reveal the strength and stiffness characteristics of Kapton foils in detail, axial and off-axial tensile tests were conducted systematically. First, Kapton foils with a thickness of 25 μm were used, and the strip specimens were manufactured according to the machine direction (MD) and the transverse direction (TD) of the foils. The stress–strain curves of the foils were obtained under five constant strain rates (10, 25, 50, 100, and 200 mm/min). Based on the stress–strain curves, the tensile strength, elongation at break, equivalent yielding stress, yielding strain and elastic modulus were analyzed and calculated. Based on the results and analysis, some useful findings were derived. The stress–strain curves showed obvious nonlinearity; and there were at most four main stages of approximate elasticity, elasticity-plasticity, plastic flow and strain hardening from the beginning of tension to fracture. The uniaxial tensile mechanical properties of the Kapton foils along the MD and TD are almost identical during the approximate elasticity stage. After that stage, the material showed different mechanical properties in the two directions. By analyzing the mechanical parameters above, quadratic or linear fitting formulas with the tensile rate as the variable were given, which can be used to predict the mechanical parameters of Kapton foils under different strain rates and provide basic data for inflatable deployable structures in the future. Second, for the same samples as above, the tensile tests of seven off-axis angles from 0° to 90° with a step size of 15° were conducted. Based on the obtained stress–strain curves, strength and elongation at break under different angles, the relationships between the elastic modulus and strain were deduced. The results show that Kapton is a typical type of nonlinear and anisotropic material. Additionally, there is an "N"-shaped relationship between the tensile strength and off-axis angles, which is different from the "U"-shaped relationship embodied in the Tsai-Hill strength criterion. The elastic modulus of Kapton foils varies as the off-axis angle changes. The elastic theory of orthotropic plates provides a good prediction of the equivalent elastic modulus of Kapton foils. The results can provide some basic references for the strength prediction, deformation calculation, and design and analysis of inflatable deployable structures.

Effects of On-Axis and Off-Axis Tension on Uniaxial Mechanical Properties of Plain Woven Fabrics for Inflated Structures

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Numerical Simulation of Whole Process and States of Tensile Membrane Structure

Experiments on the mechanical properties and the welded seam properties of architectural membranes

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Response Characteristics of Elastic Parameters of Woven Fabrics in Stress Space and a Nonlinear Constitutive Analysis

Experimental research on uniaxial tensile mechanical properties of Kapton foils

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates

Effect of triaxial woven fabric on bending properties of unidirectional composites

Experimental characterization for uniaxial tensile properties of high‐performance TX30 polyesters

An Analytical Model for the Uniaxial Tensile Modulus of Plain-Woven Fabric Composites and Its Application and Experimental Validation

Study on tensile performance of welded seams of PVC coated fabric membrane under uniaxial cyclic load

Mechanical Properties and Strength Criteria of Fabric Membrane for the Stratospheric Airship Envelope

Quasi-static mechanical behavior of 2.5D woven variable thickness composites

Off-axis tearing properties of the biaxial warp-knitted fabrics

Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites

Experimental and numerical research of temperature on tensile properties of multiaxial warp‐knitted composites