Abstract:Extensive research efforts have been made over the last few years to proffer solution to the high recombination rate and stability issues associated with Sn-based perovskite solar cells. In line with this, we modeled cesium tin iodide (CsSnI 3 )–based perovskite solar cell (PSC) with titanium (IV) oxide (TiO 2 ) and copper thiocyanate (CuSCN) as the electron and hole transport materials respectively by employing one-dimensional solar cell capacitance simulator (1D-SCAPS). For the CsSnI 3 -based PSC, n-i-p planar configuration was employed and previously published relevant data were used for the simulation. The results obtained for the initially modeled PSC compared well with similar devices in the literature. Based on the established relationship between charge carrier lifetime and power conversion efficiency (PCE) of a solar cell, we varied defect density in the cesium tin iodide (CsSnI 3 ) from 10 13 to 10 17 cm −3 and studied its influence on the performance parameters of the modeled CsSnI 3 -based PSC. We find that the diffusion length and lifetime of charge carriers are significantly increased with decreasing defect density of the CsSnI 3 absorber. In this study, we report that it is possible to significantly reduce the dominated Shockley–Read–Hall (SRH) high recombination rate occurring in CsSnI 3 perovskite layer even at a low defect density of 10 13 cm −3 by using a combination of SnCl 2 and Br − as additive and dopant respectively for CsSnI 3 enrichment. This strategy ensured a reduced concentration of Sn 4+ vacancy ( V Sn ) in the CsSnI 3 absorber and an improved carrier lifetime beyond 0.05 ns as obtained for the initially modeled CsSnI 3 -based PSC by a magnitude of the order of 10 3 while the diffusion length was improved from 1.1 μm by a magnitude of the order of 10 2 for the enriched CsSnI 3 -based PSC. For the optimized CsSnI 3 -based PSC, we recorded an open-circuit voltage ( V OC ) of magnitude 1.289 V, short-circuit current density ( J SC ) value 32.60 mA∙cm −2 , fill factor (FF) 83.56%, and PCE 35.12%.

Long Minority-Carrier Diffusion Length and Low Surface-Recombination Velocity in Inorganic Lead-Free CsSnI3 Perovskite Crystal for Solar Cells

Ultrasmall Blueshift of Near-Infrared Fluorescence in Phase-Stable Cs2SnI6 Thin Films

Inorganic CsSnI3 Perovskite Solar Cells: the Progress and Future Prospects

Localized Electron Density Engineering for Stabilized B-γ CsSnI 3 -Based Perovskite Solar Cells with Efficiencies >10%

Low-bandgap Mixed Tin–lead Iodide Perovskite with Large Grains for High Performance Solar Cells

An Absorber Enrichment Study and Implications on the Performance of Lead-Free CsSnI3 Perovskite Solar Cells (PSCs) Using One-Dimensional Solar Cell Capacitance Simulator (1D-SCAPS)

Inorganic Lead-Free B-γ-CsSnI 3 Perovskite Solar Cells Using Diverse Electron-Transporting Materials: A Simulation Study

Over 1 Μm Electron-Hole Diffusion Lengths in CsPbI2Br for High Efficient Solar Cells

Achieving beyond 30% efficiency for hole-transport-layer-free CsSnI3 perovskite solar cell: A comprehensive simulation study

Efficient Passivation Strategy on Sn Related Defects for High Performance All‐Inorganic CsSnI3 Perovskite Solar Cells

Suppressing Bulk and Interfacial Recombination Losses in Sn–Pb Perovskites for Efficient Printable Low‐Bandgap Photovoltaic Devices

Realizing High Efficiency over 20% of Low‐Bandgap Pb–Sn‐Alloyed Perovskite Solar Cells by in Situ Reduction of Sn4+

A Bifunctional Carbazide Additive For Durable CSSNI3 Perovskite Solar Cells

Large synergy effects of doping, a site substitution, and surface passivation in wide bandgap Pb-free ASnI2Br perovskite solar cells on efficiency and stability enhancement

Efficient Narrow‐bandgap Mixed Tin‐lead Perovskite Solar Cells via Natural Tin Oxide Doping

Bilateral Interface Engineering Toward Efficient 2D–3D Bulk Heterojunction Tin Halide Lead-Free Perovskite Solar Cells

Synchronized B-site alloying for high-efficiency inorganic tin-lead perovskite solar cells

Enhanced Stability of Lead-Free Perovskite Heterojunction for Photovoltaic Applications

Sn‐Pb Binary Perovskite Films with High Crystalline Quality for High Performance Solar Cells

Large Organic Cation Incorporation Induces Vertical Orientation Growth of Sn-based Perovskites for High Efficiency Solar Cells

Efficient Passivation Strategy on Sn Related Defects for High Performance All‐Inorganic CsSnI 3 Perovskite Solar Cells