Abstract:A ZW-126/D2000-40 type single-break vacuum circuit breaker (VCB) with controlled switching technology is designed and produced in this paper. The results of type tests based on IEC and GB standards are presented. A 126 kV single-break vacuum interrupter (VI) with 3/4 coil axial magnetic field (AMF) contacts is used in the VCB, which can interrupt short currents of 40 kA. The external insulation of the VI is provided by SF6 at 0.1 MPa. In order to match the 126 kV single-break VI and controlled switching device, a long-stroke electro-magnetic force actuator (EMFA) with 16 kN closing holding force and 3.5 m/s average opening speed is designed. Moreover, a position tracking controlled switching device based on closed-loop control using the technology of a fuzzy control algorithm and pulse width modulation is applied to the controlled switching device. This device is applied to control the coil current of EMFA and the electromagnetic force, so as to control the EMFA to follow the ideal position curve. The type tests of 126 kV VCB are all passed according to the IEC62271-100 and GB1984-2014, including dielectric tests, basic short-circuit tests, short-line fault tests, out-of-phase tests, etc. The strong capacitive current breaking capacity and mechanical strength of the VCB are proved by the capacitive current switching test of class C2, electrical endurance test of class E2 and mechanical endurance test of class M2. The electromagnetic compatibility (EMC) tests are passed according to the IEC61000-4. The controlled switching test of capacitive current was successful according to IEC62271-302 and GB/T30846-2014, and the controlled switching accuracy is less than ± 0.5 ms. The test results show that the VCB has excellent performance, which has broad application prospects in special occasions at a 126 kV voltage level, such as a switching capacitor and no-load transformer, etc.

Study of the Influence of Breaking Performance on the Operation Stability of Switchgear

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Study on reliability improvement of current-transferring type HVDC circuit breaker

Experimental Investigation Into the Synergy of Vacuum Circuit Breaker With Double-Break

Study on the Characteristics of the Breaking Process of LVDC Circuit Breakers in Large Time-Constant Circuits

On the Relationship Between Internal Pressure and Permittivity in the Interrupter of VCB

Statistical analysis of switching overvoltages in UHV transmission lines with a controlled switching

Analyzing a novel controllable rectifier type SVC and de-icing device's impact on the transient stability of power system

Development of High-Voltage Vacuum Circuit Breakers in China

Study on the influence of mechanism dispersion on transient recovery voltage distribution of modular DC vacuum circuit breakers

Research on an intelligent operating mechanism of high voltage circuit breaker

Development and type test of ZW-126/D2000-40 vacuum circuit breaker with controlled switching technology

Analysis of Breaking Overvoltage Characteristics of DC Circuit Breaker

Investigation on Multiple Reignitions Caused by Vacuum Circuit Breaker Switching off Shunt Reactor Considering Contact Travel in Offshore Wind Farms

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Simulation Research on the Post-arc Dielectric Recovery Characteristics of Multi-break Vacuum Circuit Breakers

Study of the Electromagnetic-Dynamics Interaction of the Breaking Process of Low-Voltage Molded Case Circuit Breaker

Study on the Dielectric Recovery Strength of Vacuum Interrupter in MVDC Circuit Breaker