Abstract:We performed a combined experimental and theoretical investigation of the oxidation behavior of pure Ni and of the following multi-component Ni-containing alloys with nearly equiatomic compositions: FeNi, CoFeNi, CoCrFeNi, and CoCrFeMnNi. The materials were exposed to air at ambient pressure and at a temperature of 800°C for 150 minutes, their weight-gain due to oxidation was continuously monitored and the products of oxidation were subsequently characterized by XRD. The most common oxides formed have spinel or halite structure and the materials resistance to oxidation increases as: FeNi < CoFeNi < Ni < CoCrFeMnNi < CoCrFeNi. We found further that the oxidation-resistance of the materials does not correlate linearly with the number of elements present, instead the type of elements impacts significantly the materials susceptibility to oxidative damage. Cr is the element that imparted higher resistance to oxidation while Mn and Fe worsened the materials performance. In order to better understand the mechanisms of oxidation we employed thermodynamic equilibrium calculations and predicted the phase stability of oxides of the elements that are present in the materials, in different ranges of temperature, composition and oxygen activity. Additionally, we determined the phase compositions for the thermodynamically stable oxides at 800°C. The results from the thermodynamic modelling are in good agreement with the experimental finds. The alloys with low resistance to oxidation such as CoFeNi and FeNi, form the Fe3O4 spinel phase which tends to dominate the phase diagram for these materials. The presence of Cr increases the resistance to atomic rearrangement due to slow diffusion in the complex structure of Cr containing spinel phases. This causes the extremely high resistance to oxidation of the CoCrFeNi alloy. The presence of Mn in CoCrFeNi stabilizes the Mn3O4 spinel which reduces the oxidation-resistance of the alloys due to the high mobility of Mn.

Oxidation Behavior of Ni-Based Alloys: Effect of Alloying Additions

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

The high-temperature oxidation behavior and mechanism in a powder metallurgy Ni-based superalloy featuring δ-Nb3Al addition

Nonlinear Oxidation Behavior in Pure Ni and Ni-Containing Entropic Alloys

Oxidation of Fe-Ni Alloys in Air at 700°C, 800°C and 950°C

Comparative study of the reactive elements effects on oxidation behavior of a Ni-based superalloy

High Temperature Oxidation Behavior of Ni-based High Entropy Superalloys

The Influence of Al and Nb on the Low Oxygen Pressure Pre-Oxidation Behavior of Fe-35Ni-20Cr-xAl-yNb Alloys at 1000 °C

Effect of Cr and W addition on the oxidation behavior of Ni–8%Al alloy at 1000 °C

Effect of Al content on the oxidation behavior of NiCoCrAlYHf alloys at 1100°C

Influence of Ti addition on oxidation behavior of Ni-Cr-W-based superalloys

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

Alloy Design for Additive Manufacturing: Early-Stage Oxidation of Nickel-Based Superalloys

Exploring the oxidation mechanism of Ni3Al based alloy by ReaxFF molecular dynamics simulation

Effect of Y on the Oxidation Behavior of a Directionally Solidified Ni-based Single Crystal Superalloy