Abstract:The purpose of this research is to investigate the effects of silicon and nano-carbon black (C.Bn), both individually and in combination, on the microstructure and mechanical properties of a three-component HfC–ZrC–TiC composite, which has not been studied until now. Four composites were fabricated with the chemical compositions of HfC–ZrC–TiC, HfC–ZrC–TiC/3 wt% Si, HfC–ZrC–TiC/15 vol% C.Bn, and HfC–ZrC–TiC/3 wt% Si/15 vol% C.Bn using the spark plasma sintering (SPS) method at a temperature of 2000 °C for 25 min under a pressure of 35 MPa. The relative density of the samples was measured using the Archimedes method. Microstructural studies and phase identification were conducted using field emission scanning electron microscopy (FESEM) and X-ray diffraction analysis (XRD), respectively. The results indicated that the addition of silicon and C.Bn, both alone and in combination, enhances densification, achieving a relative density increase from 99.7% in the additive-free sample to full density. XRD analysis revealed that in all samples, Hf, Zr, and Ti elements interdiffuse to form a solid solution. In the sample containing silicon, silicide phases (TiSi2 and HfSi2) were formed. Additionally, in the samples containing C.Bn and silicon, the SiC phase was synthesized in situ at the nanoscale. The highest and lowest hardness values were recorded at 32.1 GPa for the HfZrTi/Si/C.Bn sample and 21.6 GPa for the HfZrTi/Si sample, respectively. The fracture toughness values were 6.5 MPa m 0.5 , 6.1 MPa m 0.5 , 5.8 MPa m 0.5 , and 4.1 MPa m 0.5 for the HfZrTi/3 wt% Si/15 vol% C.Bn, HfZrTi/3 wt% Si, HfZrTi/15 vol% C.Bn, and HfZrTi samples, respectively.

HfB2-CNTs Composites with Enhanced Mechanical Properties Prepared by Spark Plasma Sintering

The Effect of CNTs on the Spark Plasma Sintering Densification Behavior and Mechanical Properties of B4C-Si Powders

ZrB2-CNTs Nanocomposites Fabricated by Spark Plasma Sintering

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Influence of CNTs on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Sintering And Enhanced Mechanical Properties Of Densified Multiwalled Carbon Nanotube/Tin Composites

Improved Fracture Toughness of CNTs/SiC Composites by HF Treatment

Strong and Tough HfC-HfB2 Solid-Solution Composites Obtained by Reactive Sintering with a SiB6 Additive

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Densification, microstructure and properties of ultra-high temperature HfB2 ceramics by the spark plasma sintering without any additives

High Fracture Toughness of HfC Through Nano‐scale Templating and Novel Sintering Aids

Low temperature sintering of Hf0.95Nb0.05B2-based ceramics with submicron-scaled grains and enhanced mechanical properties

Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering

The Effect of Si3N4 on Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-based Composite

Densification, Strengthening and Toughening in Hafnium Carbide with the Addition of Silicon Carbonitride

The effect of sintering aids on microstructure and mechanical properties of HfB2-SiC composites

Fabrication and characterization of HfCZrCTiC composites: role of carbonaceous and metallic additives

The Effect of B4C on the Microstructure and Thermo-Mechanical Properties of HfB2-based Ceramics

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system