Abstract:Three-dimensional (3D) carbon/carbon(C/C) composites with high thermal conductivity were prepared from a preform prepared by orthogonallyweaving continuous mesophase pitch-based fibers in the x and y directions andcommercial PAN-based carbon fibers in the z-direction, which were densified by three cycles of chemical vapor infiltration(CVI) and graphitization to a density of 1.58 g/cm3 (3CVI), followed by four cycles of liquid pressure impregnation (LPI), carbonization and graphitization to give a density of 1.84 g/cm3 (3CVI+4LPI). The effects of the microstructure and the relative contributionsof the fibers and matrix carbon to the thermal conductivity and mechanical properties of the C/C composites were investigated. Results indicate that the CVI pyrolytic carbon (PyC) is highly crystalline and oriented along the fiber axis. Thethermal conductivities of the 3CVI and 3CVI+4LPI C/C composites in the x-y plane are respectively 115.9and 234.7W/m·K, while those in the z-direction are only 18.6 and 41.5 W/m·K. The thermal diffusivity and thermal conductivity mainly depend on the fiber type, the volume fractions of the fibers and the type of pyrolytic carbon. The thermal conductivity of the composites is improved by increasing the volume fraction of pitch-based carbon fibers and using matrix carbon that is easily graphitized. The mechanical properties of the two C/C composites are greatly improved compared with those of 1D-C/C and 2D-C/C composites.

Thermal Conductivity of Carbon/Carbon Composites with the Fiber/Matrix Interface Modified by Silicon Carbide Nanofibers

The mechanical properties and thermal conductivity of carbon/carbon composites with the fiber/matrix interface modified by silicon carbide nanofibers

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

The effect of carbon nanotube growing on carbon fibers on the microstructure of the pyrolytic carbon and the thermal conductivity of carbon/carbon composites

Texture-inducing Effect of SiC Nanowires and Their Influence on Thermal Conductivities of Carbon/carbon Composites Up to 1900 °C

Mechanical Properties of Carbon/carbon Composites with the Fibre/matrix Interface Modified by Carbon Nanofibers

Preparation and thermal conductivity of C/C composites filled with diamond particles

The Improvement in the Mechanical and Thermal Properties of SiC/SiC Composites by Introducing CNTs into the PyC Interface

Effects of SiC Nanowire Decorated with Carbon Nanosheet on Mechanical, Heat-Dissipation and Anti-Ablation Properties of Carbon/carbon Composites

Enhanced thermal and mechanical properties of optimized SiC<sub><i>f</i></sub>/SiC composites with in-situ CNTs on PyC interface

Thermal Conductivity of Unidirectional Carbon/carbon Composites with Different Carbon Matrixes

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Enhanced Thermal and Mechanical Properties of Optimized SiCf/SiC

Effect of Pyrocarbon Content on Thermal and Frictional Properties in C/C Preforms of C/C–SiC Composites

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Effect of Carbon Nanotubes Growth on Carbon Fibers on Microstructure of Pyrolytic Carbon Matrices of C/C Composites

Thermal conductivity of C/C-SiC composites and its influence factors

Microstructure and Thermal Conductivity of Carbon/carbon Composites Made with Different Kinds of Carbon Fibers

Compression and Thermophysical Properties of Carbon Fiber-Reinforced High Textured Pyrocarbon and SiC Dual Matrix Composites

Enhanced thermal and mechanical properties of optimized S i C f / S i C composites with in-situ CNTs on PyC interface