Abstract:High-textured pyrolytic carbon (PyC) is the ideal interface for SiC fiber-reinforced SiC matrix (SiCf/SiC) composites. To prepare high-textured PyC coatings on SiC fibers efficiently, chemical vapor deposition (CVD) technique was applied with the single precursor ethanol. The effects of CVD parameters on the morphology and textures of PyC were investigated in detail. Rough laminar (RL), smooth laminar (SL) and regenerative laminar (ReL) PyC could be obtained by controlling the CVD parameters. High-textured RL PyC could be stably synthesized in a large distance range in the horizontal tube furnace at 1150 °C and 10–20 kPa (total pressure), which inferred that low temperature and negative pressure were beneficial to the formation of RL PyC. Conversely, when the temperature was up to 1350 °C, the textures of PyC at different deposition positions varied considerably. In the vicinity of isothermal zone, the texture evolution of PyC with deposition positions followed the pattern of SL→RL→SL, which could be ascribed to the ratio change of the small linear hydrocarbons (fillers) and the aromatic hydrocarbons (particles) in the gas phase. The texture evolution followed the Particle-Filler model. In addition to PyC textures, the PyC coating thickness played a critical role in regulating the mechanical properties of SiC fibers and SiCf/SiC composites. In the present work, the effects of thickness of RL PyC coatings on the tensile properties of SiC fibers were investigated. The SiC fibers with 0.3 μm RL PyC coating showed the highest average tensile strength (2735 MPa) and Weilbull modulus (10.34), which might be ascribed to the repair of fiber surface defects and the appropriate stress state between fibers and coatings. The results could provide essential data for the interface design and optimization of SiCf/SiC composites.

Texture-inducing Effect of SiC Nanowires and Their Influence on Thermal Conductivities of Carbon/carbon Composites Up to 1900 °C

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Thermal Conductivity of Carbon/Carbon Composites with the Fiber/Matrix Interface Modified by Silicon Carbide Nanofibers

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

The Improvement in the Mechanical and Thermal Properties of SiC/SiC Composites by Introducing CNTs into the PyC Interface

Compression and Thermophysical Properties of Carbon Fiber-Reinforced High Textured Pyrocarbon and SiC Dual Matrix Composites

Preparation and thermal conductivity of C/C composites filled with diamond particles

Influence of Graphitization Temperature on Microstructure and Mechanical Property of C/C-SiC Composites with Highly Textured Pyrolytic Carbon

Enhanced thermal and mechanical properties of optimized SiC<sub><i>f</i></sub>/SiC composites with in-situ CNTs on PyC interface

Enhanced Thermal and Mechanical Properties of Optimized SiCf/SiC

Effect of pyrolysised carbon content on properties of C/C composites

Enhanced thermal and mechanical properties of optimized S i C f / S i C composites with in-situ CNTs on PyC interface

Effects of SiC Nanowire Decorated with Carbon Nanosheet on Mechanical, Heat-Dissipation and Anti-Ablation Properties of Carbon/carbon Composites

Texture control of pyrolytic carbon coatings and effects of coating thickness on the tensile properties of SiC fibers

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

Effect of Pyrocarbon Content on Thermal and Frictional Properties in C/C Preforms of C/C–SiC Composites

SiC Nanowire Reinforced Carbon/carbon Composites with Improved Interlaminar Strength

Influence of SiC Nanowires on the Properties of SiC Coating for C/C Composites Between Room Temperature and 1500°C

Electromagnetic Shielding and Thermal Conductive Properties of SiC Nanowires Reinforced C/(PyC-SiC)n Composites

The mechanical properties and thermal conductivity of carbon/carbon composites with the fiber/matrix interface modified by silicon carbide nanofibers

Effects of pyrocarbon on morphology stability of SiC nanowires at high temperatures