Abstract:Different contents of carbon nanotubes (CNTs) were in situ grown on the surface of carbon fiber bundles by injection chemical vapor deposition. The fibers were then stacked into unidirectional preforms and densified by pyrocarbon (PyC) via chemical vapor infiltration. The effects of CNT on the strength and toughness of carbon/carbon composites (C/Cs) before and after heat treatment at 2100 ℃ were investigated. Results show that both the tensile strength and work of fracture achieves the optimum performance when the CNT content is 1.5 wt%. After heat treatment, the tensile strength increases by 25.68% for CNT reinforced C/Cs (CNTs-C/Cs), while only 4.36% for pure C/Cs. The refinement effect of CNT promotes the resistance of PyC matrix against destruction and makes it maintain the structural integrity and continuity even after heat treatment. Before heat treatment, the presence of CNT results in a decreased in-plane lattice size (La) compared with pure C/Cs. while interestingly, after heat treatment, La becomes larger due to the stress graphitization of CNT. The stress graphitization induced by CNT gives the carbon matrix a stronger ability to resist crack propagation, thereby enhancing the strength of the C/Cs. In addition, the existence of CNT changes the fracture mode of the C/Cs and increases the way of energy consumption during the tensile test. Thus, both fibers and the interface of the composites are fully utilized.

The effect of carbon nanotube growing on carbon fibers on the microstructure of the pyrolytic carbon and the thermal conductivity of carbon/carbon composites

Effect of Carbon Nanotubes Growth on Carbon Fibers on Microstructure of Pyrolytic Carbon Matrices of C/C Composites

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Thermal Conductivity of Carbon/Carbon Composites with the Fiber/Matrix Interface Modified by Silicon Carbide Nanofibers

Effects of Carbon Nanotubes on Char Structure and Heat Transfer in Ethylene Propylene Diene Monomer Composites at High Temperature

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

The Effect of MWNTs on the Microstructure of Resin Carbon and Thermal Conductivity of C/C Composites

Effect of in Situ Grown Carbon Nanotubes on the Structure and Mechanical Properties of Unidirectional Carbon/Carbon Composites

Microstructure and Thermal Conductivity of Carbon/carbon Composites Made with Different Kinds of Carbon Fibers

Influence of carbon nanotube content on microstructures and mechanical properties of carbon/carbon composite

Influence of carbon nanotube extending length on pyrocarbon microstructure and mechanical behavior of carbon/carbon composites

Effect of pyrolysised carbon content on properties of C/C composites

Effect of Growth Temperature on Carbon Nanotube Grafting Morphology and Mechanical Behavior of Carbon Fibers and Carbon/Carbon Composites

Reinforcing effects of carbon nanotube on carbon/carbon composites before and after heat treatment

Effect of HfC Nanowires Grown on Carbon Fibers on the Microstructure and Thermophysical Properties of C/C Composites

Densification Kinetics and Mechanical Properties of Carbon/Carbon Composites Reinforced with Carbon Nanotubes Produced in Situ

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Oxidation behavior of C/C composites with the fibre/matrix interface modified by carbon nanotubes grown in situ at low temperature

Electrophoretic deposition of carbon nanotubes onto carbon fiber felt for production of carbon/carbon composites with improved mechanical and thermal properties

The mechanical properties and thermal conductivity of carbon/carbon composites with the fiber/matrix interface modified by silicon carbide nanofibers