Abstract:Preparation process and microstructure of CF/CNTs reinforcements and mechanical properties of their composites. Chemical vapor deposition (CVD) method was performed to grow carbon nanotubes (CNTs) on oxidized carbon fiber (CF). First, CF was oxidized by a simple and gentle way to increase the number of active groups and the optimal treatment time was determined. Then, effects of catalyst concentration and growth time on morphologies and loading amount of CNTs, the properties of CF/CNTs reinforcements, and the interlayer properties of CF/CNTs composites were explored. When the catalyst concentration and growth time were controlled at a reasonable level, CNTs can be uniformly grown on the CF surface. The interlaminar shear strength (ILSS) was characterized and the fracture surfaces of CF/CNTs composites were observed. The results demonstrated that when the catalyst precursor was kept at 0.05 mol/L and the growth time was controlled at 10 min, CNTs had the best strength effect and the ILSS increased by 30.25% compared to that of composites without CNTs. The fracture surface showed that CNTs can penetrate the matrix at the interface and enhance the interface through mechanical interlocking effect. The CNTs‐induced interphase allows the stress inside the composites to propagate continuously between resin and fibers, thereby heightening the load carrying capacity. Highlights A simple and gentle way was performed to activate CF without strength reduction. The influence mechanism of various parameters was revealed in detail. The mechanism of CNTs enhancing the interface was revealed.

Oxidation behavior of C/C composites with the fibre/matrix interface modified by carbon nanotubes grown in situ at low temperature

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Oxidation behavior of in situ TiCp/Ti6Al4V composite with self-assembled network microstructure fabricated by reaction hot pressing

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Improving thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites by introducing carbon nanotubes

Preparation of in-situ grown carbon nanotubes via dithiocarbamate in composites with excellent microstructure and mechanical performance

Epitaxial Grown Carbon Nanotubes Reinforced Pyrocarbon Matrix in C/C Composites with Improved Mechanical Properties

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Study on C/C composites modified by in-situ vapor-grown carbon nanofibers

Tribological properties of carbon nanotube-doped carbon/carbon composites

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C–C composites obtained by CVI

Study on Oxidation Properties of New ACNT/C Nanocomposites

Enhanced thermal and mechanical properties of optimized S i C f / S i C composites with in-situ CNTs on PyC interface

Excellent Interfacial Structural Integrity of Pre-Oxidized Carbon Fiber-Reinforced Carbon-Carbon Composites

Oxidation protection and behavior of C/C composites with an in situ SiC nanowire-SiC-Si/SiC-Si coating

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

A carbon nanotube–enhanced SiC coating for the oxidation protection of C/C composite materials

Analyses of Reinforcing Effects of in Situ Grown CNTs on Carbon Fibre Fabric/epoxy Composites at Micro- and Macroscale

Oxidation Kinetics and Its Impact on the Strength of Carbon Short Fiber Reinforced C/SiC Ceramics