Abstract:In the present study, we report the systematic investigation of the effect of chemical oxidation on the structure of single-walled carbon nanotubes (SWNTs) by using different oxidants. The oxidation procedure was characterized by using infrared spectroscopy and transmission electron microscopy (TEM). The SWNTs were produced by chemical vapor deposition (CVD) and oxidized with three kinds of oxidants: (1) nitric acid (2.6 M), (2) a mixture of concentrated sulfuric acid (98 wt %) and concentrated nitric acid (16 M) (v/v = 3/1) and (3) KMnO4. The results reveal that the different functional groups can be introduced when the SWNTs are treated with different oxidants. Refluxing in dilute nitric acid can be considered as a mild oxidation for SWNTs, introducing the carboxylic acid groups only at those initial defects that already exist. The abundance of the carboxylic acid groups generated with this oxidant remained constant along with the treating time. In contrast, sonication of SWNTs in H2SO4/HNO3 increased the incidence of carboxylic acid groups not only at initial defect sites but also at newly created defect sites along the walls of SWNTs. Compared to the two oxidants above, when KMnO4 in alkali was used as the oxidant, which is relatively mild, different amounts of −OH, −CO, and −COOH groups were introduced. The oxidation processes begin mainly with the oxidation of the initial defects that arise during the CVD growth of the SWNTs and are accompanied by processes that can be roughly divided into two steps: (1) the defect-generating step and (2) the defect-consuming step. Specifically, during the defect-generating step, the oxidants attack the graphene structure by electrophilic reactions and generate active sites such as −OH and −CO. This step depends on the oxidant's ability to generate −C−OH groups and to transform them into −CO groups. During the defect-consuming step, the graphene structure of the tube was destroyed by the oxidation of the generated active sites in step 1. The defect-consuming step mostly counts on the ability of the oxidant to etch/destroy the graphite-like structure around the already generated −CO and their neighborhood groups.

Study on Oxidation Properties of New ACNT/C Nanocomposites

Studies on Thermal Conductive Properties and Mechanism of a New ACNT/C Nanocomposite Material

Oxidation behavior of in situ TiCp/Ti6Al4V composite with self-assembled network microstructure fabricated by reaction hot pressing

Fabrication and Characterization of Aligned Cnt/C Composites

Fabrication And Characterization Of A New Pitch-Based Acnt/C Nanocomposites

Thermal Properties of Aligned Carbon Nanotube/Carbon Nanocomposites

Fabrication and structure: a study of aligned carbon nanotube/carbon nanocomposites

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Effect of Carbon Nanotube (CNT) Content on the Properties of In-Situ Synthesis CNT Reinforced Al Composites

Effects of carbon nanomaterials on interfacial structure and mechanical properties of high temperature Ti matrix composites

A study of the electrical properties of carbon nanotube-NiFe 2O4 composites: Effect of the surface treatment of the carbon nanotubes

Tribological properties of carbon nanotube-doped carbon/carbon composites

Study on C/C composites modified by in-situ vapor-grown carbon nanofibers

Microstructure of the pyrocarbon in aligned carbon nanotube/carbon composites

Effect of carbon nanotube content and annealing temperature on corrosion performance of carbon nanotube/Ni composite layer

Oxidation Mechanism of Nickel Oxide/Carbon Nanotube Composite

Fabrication of ACF/CNT Composites by CVD Method

Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes

Improving thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites by introducing carbon nanotubes

Investigation of the microstructure and tribological properties of CNTs/Ni composites prepared by electrodeposition

Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique