Abstract:The application of C/C-SiC composites remains a challenge because of the poor mechanical properties induced by the liquid silicon infiltration method. In this study, a thick high textured pyrolytic carbon (HT PyC) interface manufactured by chemical vapor infiltration (CVI) was used to protect the carbon fibers and improve the flexural properties. The microstructure of HT PyC, its flexural properties, and its associated strengthening and toughening mechanisms were analyzed on the C/C-SiC composites. The results showed that the bending strength of the C/CSiC composites was 344.74 MPa, which is nearly 31.82% higher than that of C/C composites. The fracture mode transformed from brittle fracture to pseudoplastic fracture owing to the addition of SiC, and the C/C-SiC composites maintained a better toughness compared to C/C composites. Multiple mechanisms of strength and toughness improvement were found to be responsible for the excellent performance of the C/C-SiC composites. The HT PyC interface played a critical role in the excellent flexural properties. The strong bonding among the carbon layers and high interfacial strength between the fiber and HT PyC led to the increase of strength. Besides, the improvement in toughness was attributed to the multiple effects of the carbon-layers deformation, cracks deflection and propagation caused by the bridging areas, sublayers, nano-and micro-scale cracks.

Compression and Thermophysical Properties of Carbon Fiber-Reinforced High Textured Pyrocarbon and SiC Dual Matrix Composites

Influence of Graphitization Temperature on Microstructure and Mechanical Property of C/C-SiC Composites with Highly Textured Pyrolytic Carbon

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Mechanical Property And Toughening Mechanism Of 2.5d C/C-Sic Composites With High Textured Pyrocarbon Interface

Preparation and Mechanical Properties of Carbon/carbon Composites with High Textured Pyrolytic Carbon Matrix

Effect of pyrolysised carbon content on properties of C/C composites

Effects of Density and Heat Treatment of C/C Preforms on Microstructure and Mechanical Properties of C/C–SiC Composites

Mechanical Properties and Fracture Behaviors of C/C Composites with PyC/TaC/PyC, PyC/SiC/TaC/PyC Multi-Interlayers

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Preparation and thermal conductivity of C/C composites filled with diamond particles

Effect of Heat Treatment on the Microstructure of C/C Composites with Different High Textured Pyrolytic Carbon Contents

Texture-inducing Effect of SiC Nanowires and Their Influence on Thermal Conductivities of Carbon/carbon Composites Up to 1900 °C

Increasing the Strength and Toughness of a Carbon Fiber/silicon Carbide Composite by Heat Treatment

PyC interphase growth mechanism and control models of C/SiC composites

Influence of pyrolytic carbon interphase and pyrolysis temperature on the mechanical and tribological properties of Cf/SiC after heat treatment at 1800 °C

Effect of Pyrocarbon Interphase Texture and Thickness on Tensile Damage and Fracture in T‐700™ Carbon Fiber–reinforced Silicon Carbide Minicomposites

Effect of Pyrocarbon Content on Thermal and Frictional Properties in C/C Preforms of C/C–SiC Composites

Effect of pyrocarbon interphase texture and thickness on tensile damage and fracture in T‐700TM carbon fiber–reinforced silicon carbide minicomposites

Changes in Microstructure and Mechanical Properties of the Carbon Fiber and Their Effects on C/SiC Composites

Effect of Pyrolysis Temperature on the Mechanical Evolution of SiCf/SiC Composites Fabricated by PIP

Thermal Conductivity of Carbon/Carbon Composites with the Fiber/Matrix Interface Modified by Silicon Carbide Nanofibers