Abstract:The Poly-Si/SiO x stack passivation structure incorporate doped polycrystalline silicon (Poly-Si) and tunneling silicon oxide (SiO x ) thin films allows for majority-carrier transport as well as block minority carriers and suppress recombination, and thus enable very high efficiency. Up to now the Poly-Si/SiO x stack passivation have been a widespread research topic for photovoltaic researchers, but most of the works are only focused on n-type doped structures and the rear side polished surface of the solar cells. In order to apply the Poly-Si/SiO x stack structure to the front textured surface and p + emitter region to obtain high-efficiency double-sided passivated contact solar cells and Si-based tandem cells in the future. In this work, passivation properties of Poly-Si/SiO x stack capped with SiN x :H layer are discussed based on different crystalline silicon surface morphologies, dopant types, doping profiles and thickness of Poly-Si layer. With proper doping process control, an excellent implied open-circuit voltage ( iVoc ) of 706 mV with a saturation current density ( J 0 ) value of 12 f A/cm 2 has been obtained for the boron-doped Poly-Si/SiO x stack capped with SiN x :H based on the textured surface, and an iVoc of 736 mV with a J 0 value of 2 f A/cm 2 has been acquired for the phosphorus-doped Poly-Si/SiO x stack capped with SiN x :H based on the acid polished surface. The results show that the polished surface and thinner Poly-Si layer are helpful for passivation. For the doped Poly-Si/SiO x stack structure, the doping source will penetrate the tunneling SiO x layer into the silicon bulk to form a certain penetration depth on the surface of the silicon substrate. In order to acquire the high iVoc (low J 0 ) value, a penetration depth of around 160 nm is needed to the phosphorus-doped Poly-Si/SiO x stack, while a penetration depth of less than 25 nm is required for boron-doped Poly-Si/SiO x stack. In addition, there is a linear relationship between the R sheet value and the reciprocal value of the Poly-Si (n + ) layer thickness.

SiO2 Passivation Layer Grown by Liquid Phase Deposition for Silicon Solar Cell Application

SiO 2 Passivation Layer Grown by Liquid Phase Deposition for N-type Bifacial Silicon Solar Cells

Application of SiO2 Passivation Technique in Mass Production of Silicon Solar Cells

Ultrathin Self-Assembled Monolayer for Effective Silicon Solar Cell Passivation

Improved Silicon Surface Passivation by ALD Al2O3/SiO2 Multilayers with In‐Situ Plasma Treatments

Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells

Pinhole-like Carriers Transport in Spin-Coating SiO2 Enabling High-Efficiency Dopant-Free Si Solar Cells

Enhanced Si Passivation and PERC Solar Cell Efficiency by Atomic Layer Deposited Aluminum Oxide with Two-step Post Annealing

One-step preparation of TiO2 anti-reflection coating and cover layer by liquid phase deposition for monocrystalline Si PERC solar cell

Improved Al 2 O 3 / SiN x and SiO 2 / SiN x stack passivation layer structure PERC sc‐silicon solar cells on mass production line

Liquid-phase-deposited silicon oxide film as a mask for single-sided texturing of monocrystalline Si wafers

The Passivation Characteristics of Poly-Si/SiOx Stack for High-Efficiency Silicon Solar Cells

Wet-Chemically Grown Interfacial Oxide for Passivating Contacts Fabricated With an Industrial Inline Processing System

SiOx(C)/SiNx Dual-Layer Anti-Reflectance Film Coating for Improved Cell Efficiency

Polysilicon Passivating Contacts for Silicon Solar Cells: Interface Passivation and Carrier Transport Mechanism

High‐Performance and Industrially Viable Nanostructured SiO x Layers for Interface Passivation in Thin Film Solar Cells

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Improving the Performance of Industrial TOPCon Solar Cells Through the Insertion of Intrinsic A-Si Layer

Electronic Characteristics of Ultra‐Thin Passivation Layers for Silicon Photovoltaics

High-Density Plasma-Enhanced Chemical Vapor Deposition Of Si-Based Materials For Solar Cell Applications

Sulfur-enhanced surface passivation for hole-selective contacts in crystalline silicon solar cells