Abstract:The Poly-Si/SiO x stack passivation structure incorporate doped polycrystalline silicon (Poly-Si) and tunneling silicon oxide (SiO x ) thin films allows for majority-carrier transport as well as block minority carriers and suppress recombination, and thus enable very high efficiency. Up to now the Poly-Si/SiO x stack passivation have been a widespread research topic for photovoltaic researchers, but most of the works are only focused on n-type doped structures and the rear side polished surface of the solar cells. In order to apply the Poly-Si/SiO x stack structure to the front textured surface and p + emitter region to obtain high-efficiency double-sided passivated contact solar cells and Si-based tandem cells in the future. In this work, passivation properties of Poly-Si/SiO x stack capped with SiN x :H layer are discussed based on different crystalline silicon surface morphologies, dopant types, doping profiles and thickness of Poly-Si layer. With proper doping process control, an excellent implied open-circuit voltage ( iVoc ) of 706 mV with a saturation current density ( J 0 ) value of 12 f A/cm 2 has been obtained for the boron-doped Poly-Si/SiO x stack capped with SiN x :H based on the textured surface, and an iVoc of 736 mV with a J 0 value of 2 f A/cm 2 has been acquired for the phosphorus-doped Poly-Si/SiO x stack capped with SiN x :H based on the acid polished surface. The results show that the polished surface and thinner Poly-Si layer are helpful for passivation. For the doped Poly-Si/SiO x stack structure, the doping source will penetrate the tunneling SiO x layer into the silicon bulk to form a certain penetration depth on the surface of the silicon substrate. In order to acquire the high iVoc (low J 0 ) value, a penetration depth of around 160 nm is needed to the phosphorus-doped Poly-Si/SiO x stack, while a penetration depth of less than 25 nm is required for boron-doped Poly-Si/SiO x stack. In addition, there is a linear relationship between the R sheet value and the reciprocal value of the Poly-Si (n + ) layer thickness.

Pinhole-like Carriers Transport in Spin-Coating SiO2 Enabling High-Efficiency Dopant-Free Si Solar Cells

A High-Quality Dopant-Free Electron-Selective Passivating Contact Made from Ultra-Low Concentration Water Solution

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

< 50-μm thin crystalline silicon heterojunction solar cells with dopant-free carrier-selective contacts

Effective Hydrogenation Strategies to Boost Efficiency over 20% for Crystalline Silicon Solar Cell with Al2O3/Cu2O Passivating Contact

Progress and Future Prospects of Wide‐Bandgap Metal‐Compound‐Based Passivating Contacts for Silicon Solar Cells

Interfacial Engineering of Cu 2 O Passivating Contact for Efficient Crystalline Silicon Solar Cells with an Al 2 O 3 Passivation Layer

Efficient Silicon Solar Cells with Aluminum‐Doped Zinc Oxide‐Based Passivating Contact

Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells

Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells

A Polymer/Carbon‐Nanotube Ink as a Boron‐Dopant/Inorganic‐Passivation Free Carrier Selective Contact for Silicon Solar Cells with over 21% Efficiency

Low Oxygen Content MoOx and SiOx Tunnel Layer Based Heterocontacts for Efficient and Stable Crystalline Silicon Solar Cells Approaching 22% Efficiency

Interfacial engineering of ZnS passivating contacts for crystalline silicon solar cells achieving 20% efficiency

Design and Optimization of SiOx/AZO Transparent Passivating Contacts for High‐Efficiency Crystalline Silicon Solar Cells

Improved V 2 O X Passivating Contact for p ‐Type Crystalline Silicon Solar Cells by Oxygen Vacancy Modulation with a SiO X Tunnel Layer

Solution‐processed PEDOT:PSS/p‐Si/ZnO heterojunction solar cells

Conductive Hole-Selective Passivating Contacts for Crystalline Silicon Solar Cells

Chromium Trioxide Hole-Selective Heterocontacts for Silicon Solar Cells

The Passivation Characteristics of Poly-Si/SiOx Stack for High-Efficiency Silicon Solar Cells

Modulation of the TCO/MoO x Front Contact Enables >21% High-Efficiency Dopant-Free Silicon Solar Cells

Highly Efficient and Highly Flexible Thin Crystalline Silicon Heterojunction Solar Cells Based on Dopant-Free Carrier-Selective Contacts Fabricated with Simple Processes