Abstract:Abstract Spherical AlN powders with micrometer size have attracted great attention owing to their good fluidity and dispersity. However, the industrial preparation methods usually require high temperature and long soaking time, which lead to the high cost and limit the wide application of the products. Herein, nearly spherical AlN particles with the average size of 2.5 μm were successfully synthesized via an in-situ combustion synthesis method. The effect of N 2 pressure, NH 4 Cl content, and Al particle size on the combustion reaction procedure, phase composition, and microstructure of the products was systematically investigated. The results showed that the decreased N 2 pressure, increased NH 4 Cl content, and Al particle size led to the decreasing of combustion temperature and speed, which further affected the morphology of the products. As a result, low N 2 pressure (0.2 MPa), a small amount of NH 4 Cl (0.5 wt%), and fine Al particles (∼2.5 μm) contributed to a moderate combustion temperature and facilitated the formation of nearly spherical AlN particles. In addition, based on the gas-releasing assisted quenching experiments and thermo-kinetic analysis, a two-step growth mechanism for the nearly spherical AlN particles was rationally proposed. The present method shows the advantages of low cost and high efficiency for preparing nearly spherical AlN particles, which can be used as raw materials for electronic substrates and fillers for packaging materials.

The Synthesis of Hierarchically Meso-Macroporus Aluminum Nitrides Microparticles Via Aluminum Alloy Nitridization

Synthesis of Meso/macroporous Aluminum Nitrides Via Aluminum Alloy Ceramization

Facile synthesis of monodisperse aluminum nitride microspheres

Synthesis of Aluminium Nitride by Direct Nitridation of Molten Al-Mg-Si Alloys

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Synthesis of aluminum nitride by nitridation of γ-Al 2O3 nanopartlcles in flowing ammonia

Synthesis of Aluminum Nitride Powders from A Plasma-Assisted Ball Milled Precursor Through Carbothermal Reaction

Synthesis of Aluminum Nitride Using Sodium Aluminate as Aluminum Source

Synthesis of Aluminum Nitride by Nitridation of Γ-Al2o3 Nanoparticles in Flowing Ammonia

Nanosized Aluminum Nitride Hollow Spheres Formed Through a Self-Templating Solid–gas Interface Reaction

Synthesis of Aluminum Nitride by Nitridation of γ-Al<sub>2</sub>O<sub>3</sub> Nanoparticles in Flowing Ammonia

Synthesis of Aln Porous-Shell Hollow Spheres by A Combustion Route

High purity and good dispersity AlN nanoparticles synthesized by an arc discharge with assistance of direct nitridation

Novel Way to Synthesize Nanocrystalline Aluminum Nitride from Coarse Aluminum Powder

Synthesis of Aluminum Nitride Nanocrystals and Platelets

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

Synthesis of Nanocrystalline Aluminum Nitride by Nitridation of Δ‐al2o3 Nanoparticles in Flowing Ammonia

Mechanochemical Nonhydrolytic Sol–Gel-Strategy for the Production of Mesoporous Multimetallic Oxides

In Situ Synthesis of Carbon-Coated Aluminum Nanoparticles by Argon Protective Arc Ablation in the Liquid Nitrogen Environment

Synthesis of Ultrafine AlN Powders in an Al-OC-N System