Abstract:Abstract Spherical AlN powders with micrometer size have attracted great attention owing to their good fluidity and dispersity. However, the industrial preparation methods usually require high temperature and long soaking time, which lead to the high cost and limit the wide application of the products. Herein, nearly spherical AlN particles with the average size of 2.5 μm were successfully synthesized via an in-situ combustion synthesis method. The effect of N 2 pressure, NH 4 Cl content, and Al particle size on the combustion reaction procedure, phase composition, and microstructure of the products was systematically investigated. The results showed that the decreased N 2 pressure, increased NH 4 Cl content, and Al particle size led to the decreasing of combustion temperature and speed, which further affected the morphology of the products. As a result, low N 2 pressure (0.2 MPa), a small amount of NH 4 Cl (0.5 wt%), and fine Al particles (∼2.5 μm) contributed to a moderate combustion temperature and facilitated the formation of nearly spherical AlN particles. In addition, based on the gas-releasing assisted quenching experiments and thermo-kinetic analysis, a two-step growth mechanism for the nearly spherical AlN particles was rationally proposed. The present method shows the advantages of low cost and high efficiency for preparing nearly spherical AlN particles, which can be used as raw materials for electronic substrates and fillers for packaging materials.

Nanosized Aluminum Nitride Hollow Spheres Formed Through a Self-Templating Solid–gas Interface Reaction

Self-templated synthesis of polycrystalline hollow aluminium nitride nanospheres

Facile synthesis of monodisperse aluminum nitride microspheres

Synthesis of AlN Hollow Nanospheres Via an in Situ Generated Template Method

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

Al2O3 Hollow Nanospheres Prepared by Fluidized Bed Chemical Vapor Deposition and Further Heat Treatment

Vapor-Solid Growth And Characterization Of Aluminum Nitride Nanocones

Nanometer‐Sized Nickel Hollow Spheres

Amorphous Ni-B hollow spheres synthesized by controlled organization of Ni-B nanoparticles over PS beads via surface seeding/electroless plating

Catalyst-Free Synthesis, Morphology Evolution and Optical Property of One-Dimensional Aluminum Nitride Nanostructure Arrays

Evolution of Aluminum Nitride Nanostructures from Nanoflower to Thin Film on Silicon Substrate by Direct Nitridation of Aluminum Precursor

Low-temperature Route to Nanoscale P 3 N 5 Hollow Spheres

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

Nanoscale Hollow Spheres: Microemulsion-Based Synthesis, Structural Characterization and Container-Type Functionality

Synthesis of Aluminum Nitride by Nitridation of Γ-Al2o3 Nanoparticles in Flowing Ammonia

Synthesis of aluminum nitride by nitridation of γ-Al 2O3 nanopartlcles in flowing ammonia

Aluminum nitride nanoparticles with high purity prepared via urea glass route under different sintering conditions

Synthesis and characterization of hollow alumina spheres with mesoporous structure

Synthesis of Aluminum Nitride by Nitridation of γ-Al<sub>2</sub>O<sub>3</sub> Nanoparticles in Flowing Ammonia

Preparation of Spherical AlN Granules Directly by Carbothermal Reduction–Nitridation Method

Spherical Hollow Assembly Composed of Cu2O Nanoparticles