Abstract:Aluminium nitride (AlN) is an important technical ceramic with outstanding strength and thermal conductivity that has important applications for advanced heat sink materials and as a reinforcement for metal-based composites. In this study, we report a novel, straightforward and low-cost method to prepare AlN powder using a vacuum tube furnace for the direct nitridation of loose aluminium powder at low temperatures (down to 500 ∘C) under flowing high-purity nitrogen. Small amounts of magnesium powder (1 wt.%), combined with aluminium, promote nitridation. Here, we characterise the effects of time (up to 12 h) and temperature (490 to 560 ∘C) on nitridation with the aim to establish an effective regimen for the controlled synthesis of an aluminium nitride reinforcement powder for the production of metal matrix composites. The extent of nitridation and the morphology of the reaction products were assessed using scanning electron microscopy and X-ray diffraction analyses. AlN was detected for all nitriding temperatures ≥ 500 ∘C, with the highest yields of 80% to 85% obtained at 530 ∘C for times ≥ 1 h. At this temperature, nitridation proceeded rapidly, and there was extensive agglomeration of the reaction products making it difficult to reprocess into powder. At lower temperatures around 510 ∘C, a relatively high proportion of AlN was attained (>73% after 6 h) while retaining excellent friability so that it could be manually reprocessed to powder. The synthesised reinforcement consisted of micro- or nano-crystalline AlN comingled with metallic aluminium. The ratio of AlN and metallic aluminium can be readily controlled by varying the nitriding temperature. This provides a flexible and accessible method for the production of AlN-reinforcement powders suited to the production of metal matrix composites.

High purity and good dispersity AlN nanoparticles synthesized by an arc discharge with assistance of direct nitridation

Facile synthesis of monodisperse aluminum nitride microspheres

Preparation of Metal Nitride Particles Using Arc Discharge in Liquid Nitrogen

Synthesis of Aluminum Nitride Using Sodium Aluminate as Aluminum Source

Synthesis of aluminum nitride by nitridation of γ-Al 2O3 nanopartlcles in flowing ammonia

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

Aluminum nitride nanoparticles with high purity prepared via urea glass route under different sintering conditions

Evolution of Aluminum Nitride Nanostructures from Nanoflower to Thin Film on Silicon Substrate by Direct Nitridation of Aluminum Precursor

Efficient and cost-effective method to synthesize highly purified Ti<sub>4</sub>AlN<sub>3</sub> and Ti<sub>2</sub>AlN

Synthesis of Aluminium Nitride by Direct Nitridation of Molten Al-Mg-Si Alloys

Synthesis of Aluminum Nitride by Nitridation of γ-Al<sub>2</sub>O<sub>3</sub> Nanoparticles in Flowing Ammonia

Synthesis of AlN particles via direct nitridation in a drop tube furnace

Impacts of Temperature and Time on Direct Nitridation of Aluminium Powders for Preparation of AlN Reinforcement

Efficient and cost-effective method to synthesize highly purified Ti4AlN3 and Ti2AlN

Synthesis of Aluminum Nitride by Nitridation of Γ-Al2o3 Nanoparticles in Flowing Ammonia

SYNTHESIS OF ALUMINUM NITRIDE POWDER BY IN SITU REACTION

High-quality AlN growth: a detailed study on ammonia flow

Scalable Production of Carbon Encapsulated Ni Nanoparticles by Water Arc Discharge: Structural and Magnetic Properties

A novel method for preparation of aluminum nitride powders in air

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

Aluminium nitride layers prepared by nitrogen arc discharge on Al-Si alloy substrate