Abstract:There has been considerable interest in low-temperature in-situ integration techniques for the fabrication of hetero-structured substrates and micro/nanosystems. This study presents a novel bonding approach that uses a water vapor-assisted surface activation strategy with neutral oxygen species (NOS). This method enables of highly efficient in-situ bonding process that utilizes the controllable and flexible environment to meet specific integration needs without exposure to the unstable ambient air. The NOS and water vapor increases hydroxyl groups, leading to smoother and more hydrophilic surfaces. The combined effects of NOS and the water vapor result in a larger bonded area ratio and significantly higher bonding energy compared to those activated by NOS alone. Meanwhile, the silicon oxide and quartz glass surfaces avoid being heavily electrically charged. This process thus achieved flawless silicon/quartz glass wafer bonding at 150 degrees C with a high bonding energy (similar to 4 J/m(2)) and Si/Si bonding pairs without any subsequent annealing voids. Then, the bonding pairs have been verified to have high reliability in extreme environments from -65 degrees C to 200 degrees C with no thermal-shocked cracks. The high-quality heterointerfaces could also withstand subsequent mechanical grinding and polishing for silicon-onquartz glass (SOQ) fabrication. Moreover, a SOQ structured microfluidic heat pipe device was successfully fabricated based on the low-temperature in-situ heterogenous bonding. The robust heterointerfaces ensured nonleakage working during the heat dissipation. This facile and cost-effective bonding method is suitable for damage-free heterogeneous integration of active devices, micro/nanofluidic chips, and M/NEMS packaging. It has of great potential in fields such as biochemical analysis, quantum computing, and thermal sensing.

A Novel Surface Humidity Controlled Bonder for Low-Temperature Wafer Bonding

From Surface Activation to Microfluidic Heat Pipes: an Innovative In-Situ Wafer Level Heterogenous Bonding Method

Role of humidity and surface roughness on direct wafer bonding

Silicon Wafer Bonding by Modified Surface Activated Bonding Methods

A Model of Low‐Temperature Wafer Bonding And Its Applications

Effect of Combined Hydrophilic Activation on Interface Characteristics of Si/Si Wafer Direct Bonding

VUV/O3 Activated Bonder for Low-Temperature Direct Bonding of Si-based Materials

Low-temperature direct bonding of silicon to quartz glass wafer via sequential wet chemical surface activation

A modified low-temperature wafer bonding method using spot pressing bonding technique and water glass adhesive layer

A Novel Nontraditional Approach to C2W Cu/SiO2 Hybrid Bonding

Low Temperature Direct InP/SOI Wafer Bonding Based on Hydrophilic/hydrophobic Treatment

Heterogeneous Bonding with Nanostructured Silver Langmuir-Blodgett Film

Low-temperature Wafer Direct Bonding of Silicon and Quartz Glass by a Two-Step Wet Chemical Surface Cleaning

A Novel Low- Temperature Cu/SiO2 Hybrid Bonding Based on Functional Group Selective Construction

In-Situ Low-Temperature Bonding for Silicon-on-Quartz Substrates

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

VUV/O<inf>3</inf> activated bonder for low-temperature direct bonding of Si-based materials

Properties of room temperature bonded and UV cured temporary bonding adhesive for ultra-thin wafer's handling

Room temperature wafer bonding through conversion of polysilazane into

A Novel Design of Temporary Bond Debond Adhesive Technology for Wafer-Level Assembly

Room-temperature Direct Bonding of Silicon and Quartz Glass Wafers