Abstract:Multi-gate field effect transistors (FETs) such as FinFETs are severely affected by short-channel effects (SCEs) below 14 nm technology nodes, with even taller fins incurring fringing capacitances. This leads to performance degradation of the devices, which inhibits further scaling of nanoFETs, deterring the progress of semiconductor industries. Therefore, research has not kept pace with the technological requirements of the International Roadmap for Devices and Systems (IRDS). Thus, the development of newer devices with superior performances in terms of higher ON currents, acceptable leakage currents and improved SCEs is needed to enable the continuance of integrated circuit (IC) technologies. The literature has advocated integration of strained-silicon technology in existing FinFETs, which is highly effective in enhancing ON currents through the strain effect. However, the ON currents can also be amplified by intensifying the number of fins in trigate (TG) FinFETs. Thus, three-fin TG quantum (Q)-FinFETs, using a novel tri-layered strained-silicon channel, are deployed here at 10 nm and 8 nm channel lengths. Threshold voltage is calculated analytically to validate the designs. The electrical parameters and quantum effects of both devices are explored, analysed and compared with respect to existing heterostructure-on-insulator (HOI) FinFETs and the proposed existing standard requirement of IRDS 2022 for a 3 nm technology node. The comparisons demonstrated a significant increase in the drive currents upon employing three fins of the same dimensions (8 nm gate length) and specifications in a device-based system. The performance is augmented in contrast to the 3 nm technology node device of IRDS 2022, with SCEs within the limits. Thus, employing a tri-layered strained-silicon channel system in each fin allowed for forming a three-fin Q-FinFET that, in our opinion, is the technique for consolidating the performance of the devices and enabling future generation device for faster switching operation in a sub-nano regime.

A High Aspect Ratio Silicon-Fin FinFET Fabricated Upon SOI Wafer

High Performance Junctionless FDSOI SiGe Channel P-Finfet with High ION/IOFF Ratio and Excellent SS

Ultra-High Aspect Ratio Poly-Si Finfet Using an Improved Spacer Formation Technique

Effects of Ultra-Thin Si-fin Body Widths Upon SOI PMOS FinFETs

Drive Current and Hot Carrier Reliability Improvements of High-Aspect-Ratio N-Channel Fin-Shaped Field Effect Transistor with High-Tensile Contact Etching Stop Layer

Three-Dimensional Stacked-Fin-Cmos Integrated Circuit Using Double Layer Soi Material

FinFETs on Insulator with Silicided Source/drain

High-Performance BOI FinFETs Based on Bulk-Silicon Substrate

Graphoepitaxially Side‐By‐Side Nanofins Along Atomic Terraces for Enhancement‐Mode FinFETs with 108 On/Off Ratio

The FinFET effect in lateral 4H-SiC and Silicon multi-gate MOSFETs

Development and Analysis of a Three-Fin Trigate Q-FinFET for a 3 nm Technology Node with a Strained-Silicon Channel System

Sub-10 Nm Silicon FinFET Devices on SOI Substrate Made by Block Copolymer Lithography

Monolithic 3D integration of back-end compatible 2D material FET on Si FinFET

Low‐temperature SOI SiGe/Si superlattice FinFET with omega‐shaped channel and self‐allied silicide for 3D sequential IC

High-Drain Field Impacting Channel-Length Modulation Effect for Nano-Node N-Channel FinFETs

A Novel Method for Source/drain Ion Implantation for 20 Nm FinFETs and Beyond

A FinFET with One Atomic Layer Channel

Improved Subthreshold Characteristics of Epi-Silicon FinFET via Fin Surface Passivation Technologies

A new self-aligned BOI (Body-on-insulator) finfet fabricated on bulk SI wafers

FOI FinFET with Ultra-Low Parasitic Resistance Enabled by Fully Metallic Source and Drain Formation on Isolated Bulk-Fin

Scallop-shaped p-type FinFETs with improved short-channel effects immunity and driving current