Abstract:In this paper, we propose an optimized device structure with a highly stable process that addresses threshold voltage shift issues in the String-Select-Line (SSL) and Ground-Select-Line (GSL) gates using ferroelectric memory in 3D NAND flash memory applications. The proposed device utilizes nickel (Ni) instead of tungsten (W) for the GSL and SSL gates, enabling optimized polarization properties during the annealing process and leveraging the disparity in thermal expansion coefficients. Notably, the difference in thermal expansion coefficient from tungsten (W), employed in other Word Line (WL) gates, allows effective control over polarization properties. To validate the proposed structure, we fabricated and measured a Metal–Ferroelectric–Insulator–Silicon (MFIS) capacitor utilizing Hafnium–Zirconium Oxide (HZO) material. The measurement results indicate that a change in the upper metal layer results in a more than fivefold increase in the variance of polarization characteristics between the WL gates (responsible for the memory function) and the SSL and GSL gates dedicated to channel control. In addition, process simulation was conducted using the same device structure, confirming the application of tensile stress to the HZO thin film in the case of a W electrode and compressive stress in the case of a Ni electrode. Furthermore, applying this controlled polarization characteristic parameter to the 3D NAND flash memory structure revealed a reduction in the threshold voltage shift of the control gate from a previous change of 2.6 V or more to 0.05 V, facilitating stable control.

An Advanced Tunnel Oxide Layer Process for 65 Nm NOR Floating-Gate Flash Memories

Computational Associative Memory with Amorphous Metal‐Oxide Channel 3D NAND‐Compatible Floating‐Gate Transistors

Retention Enhancement in Low Power NOR Flash Array with High-κ–Based Charge-Trapping Memory by Utilizing High Permittivity and High Bandgap of Aluminum Oxide

Metal Floating Gate Memory Device with SiO 2 /hfo 2 Dual-Layer As Engineered Tunneling Barrier

Investigation of impact of floating gate implantation annealing on the characteristics of 4Xnm ETOX NOR-flash memory

Erratum: “A Novel Body-Tied Fin Field Effect Transistor Flash Memory Structure with Λ-Shaped Floating Gate for Sub 45 Nm NOR Flash Memory”

An Optimized Device Structure with a Highly Stable Process Using Ferroelectric Memory in 3D NAND Flash Memory Applications

Novel Vertical Channel Double Gate Structures for High Density and Low Power Flash Memory Applications.

Performance and Retention Characteristics of Nanocrystalline Si Floating Gate Memory with an Al2O3 Tunnel Layer Fabricated by Plasma-Enhanced Atomic Layer Deposition

Goi Improvement in 65nm Sacrificial Oxide Free Process Integration

Performance Enhancement of Metal Floating Gate Memory by Using A Bandgap Engineered High-K Tunneling Barrier

Study for NOR Flash Cell Burn out Failure Improvement in the Advanced Node below 65Nm

A 65-Nm 1-Gb nor Floating-Gate Flash Memory with Less Than 50-Ns Access Time

Novel SONOS and Floating-Gate Flash Memory Cell Structures for High Density and High Reliability Applications

Superior Atomic Layer Deposition Technology for Amorphous Oxide Semiconductor Thin-Film Transistor Memory Devices

An opposite side floating gate FLASH memory scalable to 20 nm length

A long-refresh dynamic/quasi-nonvolatile memory device with 2-nm tunneling oxide

Investigation of Impact of Post-Metallization Annealing on Reliability of 65 Nm NOR Floating-Gate Flash Memories

A Novel High Programming Efficiency and Highly Scalable Flash Memory Cell Based on Tunneling Fet (Tfet)

Modeling and Simulation for the Enhancement of Electron Storage in A Stacked Multilayer Nanocrystallite Silicon Floating Gate Memory

Engineering Improvement of the Core Layers of Charge Trapping Flash Memory Based on Doped HfO2 and Segmented Fabrication