Abstract:This study explores the impact of fluorine (F) erosion on the tungsten (W) gate process and proposes measures to mitigate the word line (WL) leakage resulting from F erosion in 3D NAND flash memory. As the number of layers in 3D NAND increases, the tungsten (W) gate word line (WL) layer fill process becomes more challenging during the post-gate process. As the fill path length increases, the tungsten gates become more susceptible to voiding during deposition, resulting in the accumulation of fluorine (F) by-products, and causing fluorine attack issues. In particular, under the influence of subsequent high-temperature processes, the by-products containing fluorine can diffuse into the surrounding structure and corrode the surrounding oxide layer. This leads to WL leakage, thereby affecting device yield and reliability. This paper begins by analyzing the microscopic principles of fluorine erosion in 3D NAND. We also propose a low-pressure annealing method to address the issue of fluorine erosion. Then, we conducted annealing experiments on planar thin film stacks and 3D filled structures under both atmospheric and low-pressure conditions. We used various methods to characterize the concentration and distribution of residual fluorine elements. The experimental results demonstrate that residual fluorine elements in the tungsten gate can be effectively discharged by low-pressure annealing under appropriate conditions, thus reducing the leakage index of the word line. Additionally, as the outer CH is closer to the fluorine discharge channel, the impact of low-pressure annealing on the outer CH is more pronounced than on the inner CH. Low-pressure annealing can significantly reduce the fluorine content in the tungsten gate. This method can also mitigate the issue of fluorine attack oxides and decrease WL leakage. Using low-pressure annealing treatment can also enhance the quality of 3D NAND flash technology.

Investigation of impact of floating gate implantation annealing on the characteristics of 4Xnm ETOX NOR-flash memory

Investigation of Impact of Post-Metallization Annealing on Reliability of 65 Nm NOR Floating-Gate Flash Memories

An Advanced Tunnel Oxide Layer Process for 65 Nm NOR Floating-Gate Flash Memories

Fabrication Process Improvement of Aggressively Scaled Dual-Bit/Cell Split-Gate Floating-Gate Flash Cell

Fabrication and optimization of aggressively scaled Dual-Bit/Cell Split-Gate Floating-Gate flash memory cell in 55-nm node technology

Effect of Annealing on Charge Transfer in Ge Nanocrystal Based Nonvolatile Memory Structure

Investigation of a New Disturb Effect in the Aggressively Scaled Dual-Bit/Cell Split-Gate Floating-Gate Flash Cell

Multi-Dot Floating-Gates for Nonvolatile Semiconductor Memories - Their Ion Beam Synthesis and Morphology

Effects of Annealing Atmosphere on Bulk Micro-Defects in Czochralski Silicon Wafer

Study for NOR Flash Cell Burn out Failure Improvement in the Advanced Node below 65Nm

Effects of Thermal Annealing on the Charge Localization Characteristics of Hfo2/Au/Hfo2 Stack

Floating Gate Etch Profile Control for Nand Flash Memory

Superior Endurance Performance Of Nonvolatile Memory Devices Based On Discrete Storage In Surface-Nitrided Si Nanocrystals

Metal Floating Gate Memory Device with SiO 2 /hfo 2 Dual-Layer As Engineered Tunneling Barrier

An Optimized Device Structure with a Highly Stable Process Using Ferroelectric Memory in 3D NAND Flash Memory Applications

A Novel Body-Tied Fin Field Effect Transistor Flash Memory Structure with Λ-Shaped Floating Gate for Sub 45 Nm NOR Flash Memory

Improvement of retention and endurance characteristics of Si nanocrystal nonvolatile memory device

Impact of Post-Nitridation Annealing on Ultra-Thin Gate Oxide Performance

Improvement of Fluorine Attacking Induced Word-Line Leakage in 3D NAND Flash Memory

A Study on Floating Gate Profile Control and Reliability Improvement in Planar 1XNM Nand Flash

Influence of Post-Ion-Implantation Annealing Temperature on the Characteristics of Gate Oxide on 4H Silicon Carbide