Abstract:Although metal or oxide conductive films are widely used as electrodes of electronic devices, organic electrodes would be more favorable for next-generation organic electronics. Here, using some model conjugated polymers as examples, we report a class of highly conductive and optically transparent polymer ultrathin layers. Vertical phase separation of semiconductor/insulator blends leads to a highly ordered two-dimensional (2D) ultrathin layer of conjugated-polymer chains on the insulator. Afterwards, the thermally evaporated dopants on the ultrathin layer lead to a conductivity of up to 103 S cm-1 and a sheet resistance 103 Ω/square for a model conjugated polymer poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophenes) (PBTTT). The high conductivity is due to the high hole mobility (∼ 20 cm2 V-1 s-1), although doping-induced charge density is still in the moderate range of 1020 cm-3 with a 1 nm thick dopant. Metal-free monolithic coplanar field-effect transistors using the same conjugated-polymer ultrathin layer with alternatively doped regions as electrodes and a semiconductor layer are realized. The field-effect mobility of this monolithic transistor is over 2 cm2 V-1 s-1 for PBTTT, one order higher than that of the conventional PBTTT transistor using metal electrodes. The optical transparency of the single conjugated-polymer transport layer is over 90%, demonstrating a bright future for all-organic transparent electronics.

Transparent Ambipolar Organic Thin Film Transistors Based on Multilayer Transparent Source-Drain Electrodes

High Conductivity and Transparent Aluminum-Based Multi-Layer Source/drain Electrodes for Thin Film Transistors

Transparent Flexible Organic Thin-Film Transistors That Use Printed Single-Walled Carbon Nanotube Electrodes

48.2: Invited Paper: High Conductivity & Transparent Aluminum‐based Multi‐layer Source/drain Electrodes for Thin Film Transistors

Transparent Junctionless Electric-Double-Layer Transistors Gated by a Reinforced Chitosan-Based Biopolymer Electrolyte

Transparent driving thin-film transistor circuits based on uniformly grown single-walled carbon nanotubes network

Ferroelectric Wide-Bandgap Metal Halide Perovskite Field-Effect Transistors: Toward Transparent Electronics

Highly Conductive Ultrathin Layers of Conjugated Polymers for Metal-Free Coplanar Transistors with Single-Polymer Transport Layers

Highly Transparent and Conductive W-Doped ZnO/Cu/W-Doped ZnO Multilayer Source/Drain Electrodes for Metal-Oxide Thin-Film Transistors

Transparent All-Carbon-Nanotube Thin-film Transistors

Transparent $\hbox{sno}_{2}$ Nanowire Electric-Double-Layer Transistors with Different Antimony Doping Levels

8‐4: Invited Paper: Transparent Zn Doped‐CuI for High‐Performance P‐channel Thin Film Transistors

Transparent organic thin-film transistors based on high quality polycrystalline rubrene film as active layers

Low-voltage Transparent Electric-Double-layer ZnO-based Thin-Film Transistors for Portable Transparent Electronics

High-Mobility Transparent Thin-Film Transistors with an Sb-Doped Sno2 Nanocrystal Channel Fabricated at Room Temperature

Modification of Indium Tin Oxide Electrodes by Fluorinated Silanes for Transparent Organic Thin-Film Transistors

Transparent Pentacene Organic Thin Film Transistors with Polyimide Dielectrics

Fully transparent al-doped ZnO thin-film transistors on flexible plastic substrates

The design of ZnS/Ag/ZnS transparent conductive multilayer films

All-Sputtering, High-Transparency, Good-Stability Coplanar Top-Gate Thin Film Transistors

Transparent Electronics Using One Binary Oxide for All Transistor Layers