Abstract:QN1803, a high-strength stainless steel, has been developed recently, and its tensile yield strength can be approximately 40 % (or more) higher than the commonly-used EN1.4301, while its cost is 20 % lower due to its reduced nickel content. This high-performance material can potentially be used in many applications, and one such application is plate girders. However, no experimental work has been undertaken. This issue is addressed herein. A detailed experimental study comprising seven plate girder tests is presented in this study. The plates were austenitic grade QN1803 and EN 1.4301, and the depth of web was fixed as 500 mm, 600 mm and 700 mm. For comparison, specimens with rigid end posts were also tested. The initial geometrical imperfections were first determined from three-dimensional (3D) scanning. Finite element models (FEMs) incorporating the material non-linearity and initial geometric imperfections are then developed and validated against the test results. A total of 15 tensile coupon tests are performed to investigate the effects of rolling directions on the material properties, with longitudinal coupons, diagonal coupons, and transverse coupons all being tested. The test results indicated that the 0.2 % proof stresses of the transverse coupons were approximately 8.5 % higher than that of the longitudinal coupons. The plate girder tests suggested that the shear buckling strength of QN1803 members was increased by 38.2 % on average compared to EN 1.4301 members. The design rules for determining the shear buckling strength of plate girders as provided in Eurocodes (EN 1993-1-4 +A1) (2015), North American Specification (ANSI/AISC 370-21) (2021) and those proposed by Chen et al. (2023) were evaluated. The results demonstrated that the design formulas proposed by Chen et al. (2023) can closely calculate the shear buckling strength of such QN1803 members.

Mechanical Properties of Material in Q345gj-C Thick Steel Plates

Mechanical properties and constitutive model of Q345GJ thick steel plate in China

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

Mechanical Properties and Constitutive Models of Butt-Welds in Q345GJ Thick Steel Plates

Low Cycle Fatigue Properties and Fracture Mechanism of Q345qC Steel and Its Welded Joint

Research on Damage Evolution in Thick Steel Plates

Change Characteristics of Static Mechanical Property Parameters and Dislocation Structures of 45(#) Medium Carbon Structural Steel During Fatigue Failure Process

Experimental Analysis of Mechanical Properties of Thick Plate in Steel Structure at Low Temperature

Cyclic Behavior of Q345GJ Steel Used in Energy Dissipation Shear Links

Experimental Study on Mechanical Properties and Fracture Toughness of Structural Thick Plate and Its Butt Weld along Thickness and at Low Temperatures

Experimental Study on the Through-Thickness Properties of Structural Steel Thick Plate and Its Heat-Affected Zone at Low Temperatures

Behavior of High Strength Structural Steel at Elevated Temperatures

Effects of Heat Treatment Process on Microstructure and Mechanical Properties for Extra-Thick High-Strength Steel Plate

Variations in microstructure and mechanical properties along thickness direction in a heavy high strength low alloy steel plate

Thickness Dependence of Toughness in Ultra-Heavy Low-Alloyed Steel Plate after Quenching and Tempering

Material Properties and Shear Behaviour of QN1803 High-Strength Stainless Steel Plate Girders

Experimental and Constitutive Model Study of Structural Steel under Cyclic Loading

Technology Development of High Toughness and Ultra-heavy Plate Rolled by 400mm Continuous Casting Billet

Mechanical Behavior of Q460 High-Strength Steel under Low-Cycle Fatigue Loading

EXPERIMENTAL RESEARCH ON MECHANICAL PROPERTIES OF LONGITUDINALLY PROFILED STEEL PLATE

Experimental study of high strength structural steel Q460D under cyclic loading