Abstract:Concrete-filled high-strength steel tubes (CFHST) could improve structural efficiency with lighter weight and higher capacity. However, the relative lower ductility and higher yield-to-tensile strength ratio of high-strength steel arouse worries about seismic performance of CFHST. In order to reveal the influence of high-strength steel on the elastoplastic hysteretic behavior of CFHST, 8 cantilever columns with Q550 and Q690 steel were subjected to constant axial load and cyclic top displacement. The actual yield strength of the steel was over 700MPa and the maximum axial load ratio was over 0.5. Based on the experimental observations, a finite element model was developed in ABAQUS that could consider deep plasticity behavior of CFHST members more precisely by introducing full-range elastoplastic constitutive model of high-strength steel and damaging–crushing behavior of infill concrete. The model was validated by the 8 tests of this study and other 34 cyclic-loaded CFST specimen from different researchers. 288 cyclic-loaded CFHST models were simulated by the effective numerical model in the parametric study on the elastoplastic deformation capacity of CFHST columns. The experimental and numerical investigations show that the CFHST could still have considerable deformation capacity if the local deformation of the steel tubes develop moderately. For heavy loaded CFST columns, high-strength thin-walled steel tubes have satisfying elastoplastic deformation capacity and ductility that are not worse than CFST with thick conventional steel tubes. The application of high-strength steel could delay the steel yield and control the damage of the concrete, leading to larger pre-peak deformation capacity. Finally, the empirical formulas were proposed to roughly yet efficiently estimate the ultimate drift θu of cyclic-loaded CFSTs with fy=345∼ 690 MPa, fc’=24∼72 MPa, ξ=1.0∼6.0 and n=0.20∼0.80, which is fairly practical in plastic inter-story-drift check and seismic design of CFHST structures.

Experimental study of high strength structural steel Q460D under cyclic loading

Experimental and Modeling Study of High-Strength Structural Steel under Cyclic Loading

Cyclic loading tests on high strength structural steel Q460C

Experimental Study of Structural Steel Constitutive Relationship under Cyclic Loading

Cyclic Loading Test on Welded Connection of High Strength Steel Q460C

Cyclic Behavior of 460 MPa High Strength Structural Steel and Welded Connection under Earthquake Loading

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Experimental and Constitutive Model Study of Structural Steel under Cyclic Loading

Mechanical Behavior of Q460 High-Strength Steel under Low-Cycle Fatigue Loading

Experimental Study of Confined Hot-Rolled H-shape Steel Columns under Cyclic Loading

Constitutive Model for Full-Range Cyclic Behavior of High Strength Steels Without Yield Plateau

Experimental Study of a Cyclic Constitutive Model of Building Structure Steel and Its Weld

COMPARISON OF MONOTONIC AND CYCLIC PERFORMANCES OF STRUCTURAL STEEL Q345 AND Q460

Calibration Of Cyclic Constitutive Model Of Stainless-Clad Bimetallic Steel

Experimental and numerical investigation on Q690 high strength steel beam-columns under cyclic lateral loading about weak axis

Tests and Modelling on Cyclic Behaviour of Stainless-Clad Bimetallic Steel

Mechanical performance of low-yield-point steel LYP225 under cyclic loading

Study on constitutive model of structural steel under cyclic loading

Constitutive model for cyclic behavior of mild steel under various strain amplitudes

Cyclic Loading Tests and Numerical Modeling of Concrete-Filled 700 MPa High-Strength Steel Tubes Incorporating Deep Plasticity

Experimental Investigation and FE Analysis on Constitutive Relationship of High Strength Aluminum Alloy under Cyclic Loading