Abstract:How to numerically describe and reveal the mixed tensile-shear fracture in metallic structures subjected to impulsive loadings is still a challenging problem due to the complexity that both fracture initiation and crack formation are strongly affected by the stress states induced by the dynamic impulse loadings. In this paper, an elastic–plastic phase-field model is developed to capture the mixed tensile-shear ductile fracture of impulsively loaded metal plates. Compared with the existing elastic–plastic phase-field fracture model, the stress triaxiality and Lode parameter dependent fracture initiation energy threshold locus and equivalent effective critical energy release rate are introduced to describe the stress state-dependent fracture initiation and crack formation under complex loadings. The damage parameters used in the proposed model can be calibrated with standard test data, and the calibrated model is applied to study the dynamic failure of clamped mild steel plates subjected to impulsive loading. The results show that the predicted dynamic failure of metal plates under different impulse loadings compares well with the experimental results, which verifies the ability of the proposed model to simulate ductile fracture under complex stress states. The competitive mechanism of tensile and shear fracture during the process from partial to complete tearing of the plate is further revealed. It can be concluded that as the damage evolves, the stress state in the material would approach the one with a lower equivalent effective critical energy release rate, which maximizes the energy dissipation through the fracture. This study is meaningful for evaluating and designing metal structures with better dynamic load-carrying capacity.

Research on Damage Evolution in Thick Steel Plates

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Applicability Evaluation of Damage Evolution Models in Simulating Repeated Low-Velocity Impact Behavior of Composite Laminates

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

A Metallic Constitutive Model Considering Damage Evolution and Bilinear Mixed Hardening

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Mechanical Properties of Material in Q345gj-C Thick Steel Plates

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Enhanced CDM model accounting of stress triaxiality and Lode angle for ductile damage prediction in metal forming

Ductile damage model calibration for high-strength structural steels

Continuous damage model for structural steels and weld metals under ultra-low-cyclic loading

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

Materials Constitutive Analysis on Local Buckling Damage Description of Steel Frame Members

Study On The Influence Of Residual Stresses And Damage On The Hysteretic Behaviors Of Welded-Thick-Steel-Plate Members

A unified hardening and damage characterization of Q960 steel under reverse loading

Damage Evolution Model Considering Fatigue Failure Factor Under Multiaxial Non-Proportional Loading

A constitutive model coupling damage and material anisotropy for wide stress triaxiality

Study of the Mixed Tensile-Shear Ductile Fracture of Impulsively Loaded Metal Plates by Developing a Phase-Field Fracture Model with Stress Triaxiality and Lode Parameter Dependence