Abstract:Abstract Conventional manufacturing techniques to fabricate microfluidic chips, such as soft lithography and hot embossing process, have limitations that include difficulty in preparing multiple-layered structures, cost- and labor-consuming fabrication process, and low productivity. Digital light processing (DLP) technology has recently emerged as a cost-efficient microfabrication approach for the 3D printing of microfluidic chips; however, the fabrication resolution for microchannels is still limited to sub-100 microns at best. Here, we developed an innovative DLP printing strategy for high resolution and scalable microchannel fabrication by dosing- and zoning-controlled vat photopolymerization (DZC-VPP). Specifically, we proposed a modified mathematical model to precisely predict the accumulated UV irradiance for resin photopolymerization, thereby providing guidance for the fabrication of microchannels with enhanced resolution. By fine-tuning the printing parameters, including optical irradiance, exposure time, projection region, and step distance, we can precisely tailor the penetration irradiance stemming from the photopolymerization of the neighboring resin layers, thereby preventing channel blockage due to UV overexposure or compromised bonding stability owing to insufficient resin curing. Remarkably, this strategy can allow the preparation of microchannels with cross-sectional dimensions of 20 μm × 20 μm using a commercial printer with a pixel size of 10 μm × 10 μm; this is significantly higher resolution than previous reports. In addition, this method can enable the scalable and biocompatible fabrication of microfluidic drop-maker units that can be used for cell encapsulation. In general, the current DZC-VPP method can enable major advances in precise and scalable microchannel fabrication and represents a significant step forward for widespread applications of microfluidics-based techniques in biomedical fields.

On-Chip Microfabrication of Thermally Controllable Pnipaam Microvalves by Using Optical Maskless Stereolithography

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Reasearch and fabrication of integrated pneumatic microvalves in polymer microfluidic chip

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Thermal-Responsive Anisotropic Wetting Microstructures for Manipulation of Fluids in Microfluidics

Investigation of the maskless lithography technique for the rapid and cost-effective prototyping of microfluidic devices in laboratories

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Direct Optical Patterning of Poly(Dimethylsiloxane) Microstructures for Microfluidic Chips

Autonomous capillary microfluidic devices with constant flow rate and temperature-controlled valving

Fabrication method and performance of a light-responsive hydrogel microvalve in a microfluidic chip

A simple strategy for in situ fabrication of a smart hydrogel microvalve within microchannels for thermostatic control.

High Efficiency Integration of Three-Dimensional Functional Microdevices Inside a Microfluidic Chip by Using Femtosecond Laser Multifoci Parallel Microfabrication.

A Non-Photolithography Fabrication For A Microfluidic Chip Based On Pmma Polymer

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Prototyping chips in minutes: Direct Laser Plotting (DLP) of functional microfluidic structures

Integration of Functional Microstructures Inside a Microfluidic Chip by Direct Femtosecond Laser Writing

On‐chip Laser Processing for the Development of Multifunctional Microfluidic Chips