Abstract:Resistive random access memory (RRAM) technologies based on non-volatile resistive filament redox switching oxides have the potential of drastically improving the performance of future mass-storage solutions. However, the physico-chemical properties of the TiN bottom metal electrode (BME) can significantly alter the resistive switching (RS) behavior of the oxygen-vacancy RRAM devices, yet the correlation between RS and the physico-chemical properties of TiN and HfOx/TiN interface remains unclear. Here, we establish this particular correlation via detailed material and electrical characterization for the purpose of achieving further performance enhancement of the stack integration. Two types of RRAM stacks were fabricated where the TiN BME was fabricated by physical vapor deposition (PVD) and atomic layer deposition (ALD), respectively. The HfOx layer in HfOx/PVD-TiN is more oxygen deficient than that of the HfOx/ALD-TiN because of more defective PVD-TiN and probably because pristine ALD-TiN has a thicker TiO2 overlayer. Higher concentration of oxygen vacancies induces a larger magnitude of band bending at the HfOx/PVD-TiN interface and leads to the formation of a higher Schottky barrier. Pulsed endurance measurements of up to 106 switches, with 10 μA ± 1.0 V pulses, demonstrate the potential of the studied ultra-thin-HfOx/TiN device stack for dense, large scale, and low-power memory integration.

Comprehensive study of intrinsic unipolar SiOx-based ReRAM characteristics in AC frequency response and low voltage (< 2V) operation

Resistive Switching of SiOX with One Diode-One Resistor Nanopillar Architecture Fabricated Via Nanosphere Lithography

The voltage-triggered SET mechanism and self-compliance characteristics in intrinsic unipolar SiOx-based resistive switching memory

Investigation of Edge- and Bulk-Related Resistive Switching Behaviors and Backward-Scan Effects in SiOx-based Resistive Switching Memory

A 0.13 mu m 64Mb HfOx ReRAM Using Configurable Ramped Voltage Write and Low Read-Disturb Sensing Techniques for Reliability Improvement

Oxide-based RRAM: Unified microscopic principle for both unipolar and bipolar switching

A 0.13μm 64Mb HfO<inf>x</inf> ReRAM using configurable ramped voltage write and low read-disturb sensing techniques for reliability improvement

Integrated One Diode-One Resistor Architecture in Nanopillar Siox Resistive Switching Memory by Nanosphere Lithography

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

A 0.13 Μm 8 Mb Logic-Based Cu $_{\rm X}$si $_{\rm Y}$o ReRAM with Self-Adaptive Operation for Yield Enhancement and Power Reduction

Unipolar Resistive Switching with Forming-Free and Self-Rectifying Effects in Cu/HfO2/n-Si Devices

A Self-Rectifying and Forming-Free HfOx Based-High Performance Unipolar RRAM

Material Engineering Technique for Siox-Based Embedded Rram with Cmos Compatible Process

A 0.13 µm 8 Mb Logic-Based Cu Si O ReRAM With Self-Adaptive Operation for Yield Enhancement and Power Reduction

Sub-nanosecond Pulse Programming and Device Design Strategy for Analog Resistive Switching in HfOx-based Resistive Random Access Memory

Uniform, Fast, and Reliable LixSiOy-Based Resistive Switching Memory

The role of dianglin bonds in resistance switching behaviors of SiOx - Based RRAM

Resistive switching of silicon-rich-oxide featuring high compatibility with CMOS technology for 3D stackable and embedded applications

Stack engineering for ReRAM devices performance improvement

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Ultrafast RESET Analysis of HfOx‐Based RRAM by Sub‐Nanosecond Pulses