Abstract:The TiSiN/Ag multilayer coatings deposited on Ti6A14V alloy substrate using the multi -arc ion plating system. All multilayer coatings had a same total thickness of about 2.5 mu m, and the TiSiN layer had a fixed thickness and the Ag layer had different thicknesses. Evidence concluded from X-ray diffraction, scanning electron microcopies, X-ray photoelectron spectroscopy revealed that nanocrystallites and amorphous microstructure of nc-TiN and amorphous Si-3 N-4 for individual TiSiN layers, where amorphous Si3N4 around nanocrystallites TiN boundaries, and ductile nanocrystallites silver clusters and metallic silver for individual Ag layers which can limit continuous growth of single (200) preferential orientation coarse columnar TiN crystal. In addition, the TiN grain size presented a decreasing trend with the decrease of the thickness of Ag layers. The TiSiN/Ag multilayer coatings showed a significantly improved toughness compared with the TiSiN coating. The individual Ag layers of nano-multilayer coatings, not only as a self-lubricating but also as a barrier which inhibited micro cracks propagation, the formation of threading defects throughout all coatings, cause energy dissipation by passing through the interface zones without making the coating fail and at the same time prevented the aggressive seawater through the micro-pores. Moreover, improved toughness, excellent wear resistance together with high hardness, H/E and H-3/E-*2 values were found for the TiSiN/Ag multilayer coating with the individual Ag layers of 22.22 nm. (C) 2016 Elsevier B.V. All rights reserved.

Comparison of Size Dependent Strengthening Mechanisms in Ag/Fe and Ag/Ni Multilayers

Size-dependent microstructural evolution and mechanical properties of crystalline/amorphous high-entropy alloy nanostructured multilayers: Cu/FeCoCrNiBSi vs Ni/FeCoCrNiBSi

Progress in Research on the Mechanical Properties of Nanoscale Metallic Multilayers

Microstructure and nanoindentation hardness of Ag/Fe multilayers

Molecular dynamics studies of the effect of intermediate Fe layer thickness on the enhanced strength and ductility of Cu/Fe/Ni multilayer

Interfacial Structures Governed Plastic Deformation Behaviors in Metallic Multilayers

Nanoindentation and Microtribological Behavior of Fe–N/Ti–N Multilayers with Different Thickness of Ti–N Layers

Microstructure and mechanical properties of nanoscale Cu/Ni multilayers

Interface-affected mechanical properties and strengthening mechanisms in heterogeneous high entropy alloy nanolaminates

Structure, Mechanical and Tribological Properties of Self-Toughening TiSiN/Ag Multilayer Coatings on Ti6Al4V Prepared by Arc Ion Plating

Individual Layer Thickness Dependence of Microstructure and Mechanical Properties of Magnetron Sputtering Mo-W-Doped Ni/Ni3Al Multilayers

Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings

Ultra-high strength and plasticity mediated by partial dislocations and defect networks: Part II: Layer thickness effect

Mechanical Properties of Thermally Annealed Cu/Ni and Cu/Al Multilayer Thin Films: Solid Solution vs. Intermetallic Strengthening

Microstructure and Mechanical Properties of Fe-N/TiN Multilayers

Nanoindentation Investigation of the Mechanical Behaviors of Nanoscale Ag/Cu Multilayers

Microstructure and ultrahigh strength of nanoscale Cu/Nb multilayers

The ultra-high enhancement of hardness and elastic modulus in Ag/Nb multilayers

Influence of Silver Layer Thickness on Microstructure and Magnetic Properties of NiCo/Ag Multilayers

Structural and Magnetic Properties of [fe/ni](n) Multilayers

Mechanical properties and strengthening mechanism of Ni/Al nanolaminates: role of dislocation strengthening and constraint in soft layers