Abstract:<p>Layer thickness dependent mechanical behavior of metallic nanolaminates have been extensively investigated. In a recent study <a class="workspace-trigger" href="#bib0001">[1]</a>, we show that a particular defect network, consisting of layer interface, stacking faults and twin boundaries, plays an important role in achieving high strength in Cu/Co multilayers. Here, we report a follow-up study on the effect of layer thickness on this unique interplay of defect networks. To this end, we investigate the mechanical behavior of highly textured Cu (111)/Co (0002) multilayers with individual layer thickness of 5, 25 and 100 nm. <em>In situ</em> micropillar compression tests show that the Cu/Co 25 nm multilayers have a much higher strength than 100 nm and 5 nm multilayers. Post-deformation TEM analyses and MD simulations reveal the layer thickness dependent variations of defect density dominating the strengthening effect in multilayers. This study provides new perspectives on optimal defect networks for the design high strength, deformable metallic materials.</p>

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: How does the mechanical property of copper - cobalt (Cu/Co) multilayer film materials change under different layer thickness conditions, especially the influence mechanism of the defect network (composed of layer interfaces, stacking faults and twin boundaries) on the strength and plasticity of the materials. Specifically, the author studied the mechanical behaviors of Cu/Co multilayer film materials with different layer thicknesses of 5 nm, 25 nm and 100 nm in compression tests, as well as the microstructural changes behind these behaviors. ### Analysis of the Core Problems in the Paper 1. **The Influence of Layer Thickness on the Formation of Defect Networks** - It was found that when the layer thickness is 100 nm, a lower - density of coherent twin boundaries (CTBs) are formed in the material, resulting in local deformation mainly occurring in the Cu layer. - When the layer thickness is reduced to 5 nm, the Cu/Co interface becomes coherent, and Shockley partial dislocations can pass through the coherent interface, leading to material softening. - When the layer thickness is 25 nm, a high - density defect network is formed in the material, including twin boundaries, stacking faults and incoherent FCC/HCP interfaces. These defect networks work synergistically to significantly improve the strength and plasticity of the material. 2. **Deformation Mechanisms under Different Layer Thicknesses** - **100 - nm Layer Thickness**: Due to the strength difference between the Cu and Co layers, the deformation is mainly concentrated in the softer Cu layer, resulting in the extrusion of the Cu layer. - **25 - nm Layer Thickness**: The high - density defect networks in the Cu and Co layers enable the two - layer materials to deform cooperatively, showing a uniform deformation behavior. - **5 - nm Layer Thickness**: The coherent interface allows partial dislocations to pass through, leading to material softening. 3. **The Influence of Defect Networks on Material Properties** - The existence and density of defect networks have a significant impact on the strength and plasticity of materials. The Cu/Co multilayer film with a 25 - nm layer thickness shows the highest strength and good plasticity due to the high - density defect network. - Although the Cu/Co multilayer film with a 100 - nm layer thickness also has a defect network, the large defect spacing results in lower strength. - The Cu/Co multilayer film with a 5 - nm layer thickness lacks a high - density defect network and has a coherent interface, resulting in material softening. ### Summary This paper reveals the influence mechanism of layer thickness on the formation of defect networks and their influence on the strength and plasticity of materials by systematically studying the mechanical properties of Cu/Co multilayer films under different layer thicknesses. The research results provide a new perspective for designing high - performance metal materials, especially in optimizing defect networks to improve the strength and plasticity of materials.

Ultra-high strength and plasticity mediated by partial dislocations and defect networks: Part II: Layer thickness effect

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

Molecular dynamics studies of the effect of intermediate Fe layer thickness on the enhanced strength and ductility of Cu/Fe/Ni multilayer

Microstructure and ultrahigh strength of nanoscale Cu/Nb multilayers

Interfacial Structures Governed Plastic Deformation Behaviors in Metallic Multilayers

Effect of layer thickness on mechanical properties of Cu/CoCrFeNi nanolaminates: Implications from a quantitative flow stress model

Effect of Al2Cu constituent layer thickness discrepancy on the tensile mechanical behavior of Cu/Al2Cu/Al layered composites: A molecular dynamics simulation

Tailoring strength and plasticity of Ag/Nb nanolaminates via intrinsic microstructure and extrinsic dimension

Deformation Mechanisms Dominated by Decomposition of an Interfacial Misfit Dislocation Network in Ni/Ni3Al Multilayer Structures

Uniaxial Tension Deformation Study of Copper/nickel Laminated Composites: Effects of Lamella Number and Interlamellar Spacing

Modulating Individual Thickness for Optimized Combination of Strength and Ductility in Cu/Ru Multilayer Films

Progress in Research on the Mechanical Properties of Nanoscale Metallic Multilayers

Atomic-scale deformation mechanisms of nano-polycrystalline Cu/Al layered composites: a molecular dynamics simulation

Fatigue-induced interface damage in Cu/V nanoscale metallic multilayers

Atomistic simulation of plasticity in Cu/Nb metallic nanolayered composites with thick interfaces

Influence of interface on deformation compatibility of a heterogeneous Cu/Al nanoscale multilayer

Interface microstructure effects on dynamic failure behavior of layered Cu/Ta microstructures

Enhancing co-deformation ability of nanograined Ni-W layers in the Ni/Ni-W laminated composites

Strong and Plastic Metallic Composites with Nanolayered Architectures

Shear strain gradient in Cu/Nb nanolaminates: Strain accommodation and chemical mixing